M8 Projecting Bolt Nut Stud Shield Masonry Concrete Anchor Zinc

M8, 8mm Diameter Stud, Projecting Bolt - Shield Anchor - Heavy Duty Fixing - Brick/ Masonry, Rawl/ Wall Bolt, Nut and Stud Type Fixaball sells lengths of M8/ 8mm Diameter, 'nut type' projecting bolt, masonry anchors. What is a projecting bolt and where are they most commonly applied? Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures. They are most commonly used on walls as the pertruding stad helps to hang items in situ. They can be used in concrete, brick/ block and non-porous stone. It comprises of a 3 part shield, threaded bar, nut and washer. It is an expansion anchor that pushes outwards at 3 points as the nut is tightened. Projecting Bolt Applications Projecting bolts are used when material/ fixtures need to be held in place during installation. The projecting threaded bar is used as a locator. Care must be taken not to damage the thread during installation. Shield anchors have an added advantage of being able to function with holes that vary in size/ quality. A shield anchor will only ever be as good as the grade of material that it’s being fixed to. Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. Please make your 'no. of items in pack', 'length' and 'quantity', of packs selection from the drop down menus. Max joining thicknesses available: 15mm, 40mm, 80mm. Installation Drill the correct sized hole, clear/ clean the hole (brush and air pump), place the anchor in the hole, set the fixture/ material in place, fix by tightening the nut. Table: Shows typical masonry shield anchor properties All measurements in Metric - mm Thead Diameter Hole Diameter Hole Depth Fixture/ Material Clearance Hole Center Spacing Between Holes Minimum Distance From Edge of Material Tensile/ Pull Load k/N (tonnes) Shear Load k/N (tonnes) Torque to tighten Nm M8 14 55 9 – 10 150 100 4.8 4.4 15 All specifications are true with correct installation Image is for illustrative purposes only.

M8 Projecting Bolt Nut Stud Shield Masonry Concrete Anchor Zinc

M8, 8mm Diameter Stud, Projecting Bolt - Shield Anchor - Heavy Duty Fixing - Brick/ Masonry, Rawl/ Wall Bolt, Nut and Stud Type

Fixaball sells lengths of M8/ 8mm Diameter, 'nut type' projecting bolt, masonry anchors.

What is a projecting bolt and where are they most commonly applied?

Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures. They are most commonly uséd on walls as the pertruding stad helps to hang items in situ.

They can be uséd in concrete, brick/ block and non-porous stone.

It comprises of a 3 part shield, threaded bar, nut and washer. It is an expansion anchor that pushes outwards at 3 points as the nut is tightened.

Projecting Bolt Applications

  • Projecting bolts are uséd when material/ fixtures need to be held in place during installation.
  • The projecting threaded bar is uséd as a locator.
  • Care must be taken not to damage the thread during installation.
  • Shield anchors have an added advantage of being able to function with holes that vary in size/ quality.
  • A shield anchor will only ever be as good as the grade of material that it’s being fixed to.

 

Orders placed before 2pm are dispatched same day (Mon-Fri).

Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. 

Please make your 'no. of items in pack', 'length' and 'quantity', of packs selection from the drop down menus.

 

Max joining thicknesses available: 15mm, 40mm, 80mm.


    Installation

    Drill the correct sized hole, clear/ clean the hole (brush and air pump), place the anchor in the hole, set the fixture/ material in place, fix by tightening the nut.                                                                                                                                                                            

    Table: Shows typical masonry shield anchor properties

    All measurements in Metric - mm

    Thead Diameter

    Hole Diameter

    Hole Depth

    Fixture/ Material Clearance Hole

    Center Spacing Between Holes

    Minimum Distance From Edge of Material

    Tensile/ Pull Load

    k/N (tonnes)

    Shear Load k/N (tonnes)

    Torque to tighten Nm

    M8

    14

    55

    9 – 10

    150

    100

    4.8

    4.4

    15

    All specifications are true with correct installation

     

    Image is for illustrative purposes only.

    Postage info

    Click the Postage tab above the listing description for more info

    Additional delivery notes

    PICK UP OPTION

    Sorry, our items are NOT available for pick-up.

    PAYING VIA PAYPAL


    We accept PayPal on our all our items so you can shop with confidence.

    Simple choose the PayPal option when proceeding through the checkout.

    Paying via Direct Deposit

    Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase.

    Additional Information

    No additional information at this time

    Ask seller a question

    To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

    Ask seller a question

    © Fixaball

    Click the Postage tab above the listing description for more info

    Accepted Payment Methods

    • PayPal
    • Direct Deposit

    Returns are accepted

    Items must be returned within 30 days of the auction ending

    Buyer will pay for return shipping.


    Additional Information:
    Returns 'NO QUIBBLE' Our returns policy lasts 30 days. If 30 days have gone by since delivery, unfortunately we can’t offer you a refund or exchange (+ a couple of days, grace). To be eligible for a return, your item must be unuséd and in the same condition that you received it. It must also be in the original packaging with original documentation. A restocking fee of 15% will be applied to refunds. Cost of sending the shipment is not refunded unless the wrong item was sent. To complete your return, we require a receipt, invoice or other proof of purchase. This will enable an easier process of locating and amending orders. Please keep all labels, stickers and original packaging to be eligible for free returns. Refunds (if applicable) NO QUIBBLE - We invite all people to stay with us as their preferred supplier of fixings and fasteners. If you're not happy, we will do everything possible to help. Please, please, please keep all documents, stickers, labels and packaging; it makes the process run quicker and easier. Orders over £1000 need to be returned within 5 working days to be accepted, processed and refunded. Late or missing refunds (if applicable) If you haven’t received a refund on the day of return please contact us to verify the situation. Banks vary in their reaction time to changes; there is often some processing time before a refund is posted. Any concerns no matter how small, contact: 01242 522244 Sale items (if applicable) Only regular priced items may be refunded, unfortunately sale items cannot be refunded. Exchanges (if applicable) NO QUIBBLE - All exchanges are welcomed, assuming that items are suitable for re-sale. Please, return the item with the invoice and a note describing what you would like as an exchange. AN invoice will be sent to cover the postage to send the exchanged item. Free returns are available in the very rare event that we have sent an incorrect item. Orders over £1000 need to be returned within 5 working days to be accepted, processed and exchanged. Shipping 99% of orders are dispatched the same day as purchase if the order was made before 2pm. After 2pm your order will join the following days post. Royal Mail deliver most items up to 2kgs and Interlink Express deliver our oversized and heavier items, next day. Usually, the easy bit is getting the order out the door, but, what happens after can occasionally disappoint us both. If delivery is crucial/ time sensitive, you should select a faster and/ or signed for postage option at checkout. Mailing Disclaimer 98% (490 orders) of shipping arrives on time. 2% (10 orders) are late 1.4% (7 orders) 1 day late 0.4% (2 orders) 2 days late 0.2% (1 order) 3+ days late 0.01% is reported lost. - 1 every couple of years Our 'NO QUIBBLE' guarantee gives you peace of mind that we will accept all, undamaged returns and issue a refund, every time. If you need a definite arrival time please select an express service at check out to avoid disappointment.