EAGLE 10.5mm Ignition Spark Plug Leads Wires Holden Commodore VT VX VY VZ Chev Gen III 3 LS1 5.7L 99-06
10.5mm Eliminator Series II Eagle Leads

This listing is for one replacement BLACK colour 10.5mm lead- not a full set

CURRENTLY ONLY AVAILABLE IN BLACK 

10.5mm Eliminator Series II Racing Eagle Leads

Specifications:

• Chev 6.0-6.2L LS2, LS3 series Gen IV V8
• 10.5mm Eliminator Series II Eagle Leads
• HEI angled dist. boots/ angled spark plug boots
• Available Colours- Red, Blue, BLACK ONLY - please specify

These are the next generation in high performance and racing ignition lead technology. Designed for all ignition systems including very high output aftermarket ignition systems such as Crane, MSD and ICE systems.

The Eagle 10.5mm leads have 3 layers of silicone jackets to allow the leads to carry secondary voltages in excess of 70,000 volts while emitting virtually zero RFI. This means that they are also compatible with virtually all hi-tech on board computer systems.

Although we try to keep all of the popular combinations of Eagle ignition leads on the shelf, it is impossible to keep them all on the shelf especially when you take into account that Eagle make their sets from 9.0mm, 10.5mm and 11.0mm silicone coated cable in 3 different colours. Then you have under exhaust manifold, over the valve cover and around the valve cover sets. On top of that we need to account for different spark plug boots and standard ignition distributor boots (female cap posts), HEI (male disi cap posts) and MSD boots.

When we have your leads in stock, we try to send the order out within 24 hours. If your set needs to be ordered from Eagle, please allow 3-10 days before shipping depending on Eagles production times. Please let us know if your set is urgent.

EAGLE ELIMINATOR II 10.5mm COPPER FERRITE SPIRAL CORE LEADS
The next generation in street/strip ignition lead technology!
Lead Diameter	10.5mm
Colour	Blue, Black & Red
Application	High Performance Street /Strip vehicles but primarily designed for racing applications burning Hi-octane and Methanol fuels.
Ignition System Compatibility	Very high output aftermarket ignition systems including most Crane™ & MSD™ types. Note: We recommend consulting with your ignition manufacturer for system compatibility before using this product.
Description	Eliminator Series II ignition leads have been specifically designed to cope with today’s high compression high horsepower race engines. Being fitted with three layers of Silicone jackets, they are a proven performer at carrying secondary voltages in excess of 70,000 volts whilst emitting virtually zero RFI making them compatable for use with virtually all hi-tech on board computer systems.
Cable Standards	Tested to ISO 3808 Standards.
Features	Eagle's Finger Grip SPB Features
	Eagles computer designed "finger grip" Spark Plug Boot allows easy on – easy off installation.
	Unequalled durability by using our best High Temp Silicone compounds.
	Terminal Features
	Zero rust 0.43mm Stainless Steel Base.
	High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
	Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.
	Cable Features
	Ultra low 325 ohms per metre resistance Spiral wound. Stain Steel over Ferrite coated Kevlar™ inner core.
	Nylon Tape gives exceptional tensile and terminal pull off strength.
	Three 260° C Hi-temp Silicone jackets for superior insulating properties.
Please Note	Above specifications may vary due to technological advances at manufacturer’s discretion.

When we have your leads in stock, we try to send the order out within 24 hours. If your set needs to be ordered from Eagle, please allow 3-10 days before shipping depending on Eagles production times. Please let us know if your set is urgent.

EAGLE 10.5mm Ignition Spark Plug Leads Wires Holden Commodore VT VX VY VZ Chev Gen III 3 LS1 5.7L 99-06 10.5mm Eliminator Series II Eagle Leads This listing is for one replacement BLACK colour 10.5mm lead- not a full set CURRENTLY ONLY AVAILABLE IN BLACK 10.5mm Eliminator Series II Racing Eagle Leads Specifications: Chev 6.0-6.2L LS2, LS3 series Gen IV V8 10.5mm Eliminator Series II Eagle Leads HEI angled dist. boots/ angled spark plug boots Available Colours- Red, Blue , BLACK ONLY - please specify These are the next generation in high performance and racing ignition lead technology. Designed for all ignition systems including very high output aftermarket ignition systems such as Crane, MSD and ICE systems. The Eagle 10.5mm leads have 3 layers of silicone jackets to allow t