Parameter information
Main material: resin monomer & photo initiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s
Characteristics
For LCD: Specifically designed for LCD light source to achieve better printing quality
High Precision: Low shrinkage, dimensional stability when printing. The model has high precision and clear details.
Quick Curing: UV resins can be rapid prototyping. It has been developed to reduce the forming time.
Rigid & Toughness: UV resin have good combination of hardness and toughness, which brings easy removal of the model and fine printing details.
Bright Colors: The color of the resin is bright and pure, in line with the international G7 standard
Storage method
Keep
away from light seals at room temperature. (Sunshine contains a lot of
UV light, will solidify photosensitive resin. After testing, the light
is not affected as long as it is not UV light).
It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin.
Sealed
storage, excessive dust or moisture can affect print quality. Sunshine
contains a lot of UV light, will solidify photosensitive resin.
Usage
Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
Printed
models need to use high-concentration alcohol to clean about 30S
(recommended concentration of 95% or more, the higher the better).
Do
not pour the resin in the resin vat into the unused resin, do not leave
the resin in the resin vat for a long time without use to avoid resin
pollution affect the printing effect(long time without the resin can be
introduced into airtight containers or sealed with plastic wrap shading
save).