New
USB BNC
24bit、192K
Upgrade AK4495/AK4118
decoding, CS8416 receiver, TE7022L do USB receiver, CS3310
Main
Chips:
AK4495/AK4118
Sampling IC:
CS8416, PCM 1794
Output OP amp: OPA2604 x 1, LF353N x2
Output tube: 6H3N
Sampling frequency rate: 32, 44.1, 48, 88,2, 96, 192K
Input: Toslink + 2 SPDIF. The optional TE7022L modules to add
the USB input.
Output: Headphone + OP amp + Op amp & tube buffer.
Second, the
specification parameters:
Dimensions: Width 260mm, depth 167mm, height 55mm (excluding
knobs, machine feet, connector size)
Frequency response: 20Hz-30KHz
SNR: Common port output: 110dB
Tube port output: 90dB
harmonic distortion: Normal port output: <0.001%
Tube port output: <0.1%
Support 16bit, 20bit, 24bit digital stream
supports the following sampling frequencies: 44.1kHz, 48kHz,
88.2kHz, 96kHz, 192KHz
Output Level: 2000mV
Dynamic range: 120dB
Input Impedance: 75 ohms figures
Line Output impedance: 600 ohms
Headphone Output Impedance: 32 ohms -600 Europe
Earphone output power: 500-100
Size: 26cm x 5.5cm x 17cm
Net weight: 2.5kg
Input voltage:230V/110V 60-50Hz
Panel Color: Black.
AC: 220/110 select.
AK4495/AK4118 decoding, CS8416 receiver, TE7022L do
USB receiver, CS3310 do electronic volume, the company's top
chip OPA2604 + TI TPA6120 do amp, 3-line OPA2604AP do with
gilded Block I / V and LPF section , LM317 / LM337 op amp
regulators do.
DALE resistance by the United States or Japan, light tone,
capacitance capacitors using Suren, ELNA capacitors.
The decoder also has a remote control function to achieve
channel switching, volume addition and subtraction, mute, etc.,
and has a memory function, the next boot automatically shut down
when placed in the state. This is good news for the remote
control of the amplifier is no! Lazy choice!
Customized self-reset switch and volume switch 360 degrees, feel
good! |