Fluke 27 II/28 Ii Digital Industrial Multimeters Waterproof 20,000 Count Msha

 

Fluke 28 II Industrial Multimeters
The NEW Fluke 28 II digital multimeter define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series Multimeters are built to work in the toughest environments.

 

I.Feature: 
 
Measure up to 1000 V ac and dc Measure up to 10 A (20 A for 30 seconds). 
 
10,000 μF capacitance range Frequency to 200 kHz. 
 
Extended ac voltage bandwidth– 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II). 
 
Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (28 II) Resistance, continuity and diode test. 
 
Min/Max and average recording to capture variations automatically Peak min-max (28 II). 
 
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (28 II). 
 
New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments. 
 
Designed to withstand 3 meter drop (with holster). 
 
Hi resolution 20,000 count display mode (28 II). 
 
True-rms ac voltage and current for accurate measurements on non linear signals (28 II). 
 
Average responding voltage and current for measurements (27 II). 
 
New – Backlit keypad buttons allow for easy visibility in lowlit areas. 
 
Large display digits and 2 level bright white backlight for increased visibility. 
 
Reversible holster for added protection when not in use. 
 
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards. 
 
Long battery life (800 hours). 
 
Relative mode to remove test lead resistance from low ohms measurements. 
 
Auto and manual ranging for maximum flexibility. 
 
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks. 
 
MSHA approval. 
 

 

II.Specification:

Accuracy specifications

DC voltage

Range

 0.1 mV to 1000 V

Accuracy

 27-II:0.1 % +1
28-II:0.05 % + 1

AC voltage

Range

 0.1 mV to 1000 V

Accuracy

 27-II: 0.5 % +3
28-II: 0.7 % +4

DC current

Range

 0.1 μA to 10 A

Accuracy

 27-II: 0.2 % + 4
28-II: 0.2 % + 4

AC current

Range

 0.1 μA to 10 A

Accuracy

 27-II: 1.5 % + 2
28-II: 1.0 % + 2

Resistance

Range

 0.1 Ω to 50 MΩ

Display counts

27-II

 6000

28-II

 6000/19,999

Capacitance

 

 1 nF to 9999 μF

Frequency

 

 0.5 Hz to 199.99 kHz

Temperature

 

 27-II: N/A
28-II: -200 °C to +1090 °C

Low pass filter (Measurement on VSD’s)

 

 27-II: N/A 
28-II: Yes

Compliance

 

 CAT IV 600 V , CAT III 1000V

IP rating

27-II:

 IP 67

28-II:

 IP 67

Power

 

 Three AA batteries

Battery life

 

 800 hours

General specifications

Display

Bar graph/backlight

 Yes/Yes

Data storage

Peak transient capture

 250 μS (28 II)

Min/Max/Avg

 Yes

Reading hold

 Yes

Other features

Relative readings (zero)

 Yes

Battery type

 Three AA batteries

Warranty and protection

Safety rating

 CAT IV 600 V/CAT III 1000 V

Mine Safety

 MSHA Approved

External protection

 Rubber holster

Drop test

 10 feet drop test

Dustproof/waterproof

 Yes, IP 67 rated

Warranty

 Limited lifetime

Size (HxWxL) with holster

 6.35 cm x 10.0 cm x 19.81 cm (2.5 in x 3.93 in x 7.8 in)

Weight with holster

 698.5 g (1.54 lb)
 
Fri, 29 Mar 2024 02:32:00 GMT 638473051204450006 5C39737447DA64EA