eBay

5Pcs 5A Lithium Charger Cv Cc Buck Step Down Power Supply Module Led Driver New

When you use the product, the module inputs and outputs to be isolated from ground！.

Specifications:

1.Input voltage range:6～38VDC(Note:input voltage not exceeding 38V).

2.Output voltage range:1.25-36VDC adjustable.

3.Output current: 0-5A.

4.Output power: 75W.

5.High efficiency up to 96%.

6.Built in thermal shutdown function.

7.Built in current limit function.

8.Built in output short protection function.

9.Input reverse polarity protection: None (if required, high current diode in series with the input).

10.L x W x H =61.7*26.2*15mm.

11.Weight: 20g.

Application:

1.Use as a step-down modules with overcurrent protection capabilities.

Usage.

(1) adjust the “voltage potentiometer” so that the output voltage reaches the value you want.

(2) use a multimeter to measure the output short-circuit current with 10A stalls, while regulating the “current potentiometer” so that the output current reaches a predetermined overcurrent protection value. (For example, the meter displays the current value of 4A, then you can use the module to a maximum current of 4A).

(3) Connected to the load.

2.Use as a battery charger.

Usage.

(1). Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA).

(2). Under no-load conditions, adjust the “Voltage potentiometer” so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V).

(3). use a multimeter to measure the output short-circuit current with 10A stalls, while regulating the “current potentiometer” so that the output current reaches a predetermined Charging current value.

(4). Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged).

(5).connected to the battery charge.

(1.2.3.4 steps as: Output is unloaded, do not connect the battery).

3.Use as a LED constant current driver module.

Usage.

(1). adjust the “voltage potentiometer” so that the output voltage reaches the value you want.

(2). use a multimeter to measure the output short-circuit current with 10A stalls, while regulating the “current potentiometer” so that the output current reaches a predetermined LED operating current.

(3). Connect LED, work.

(1.2 steps as: Output is unloaded, do not connect LED).

Wed, 22 Jun 2022 12:55:52 GMT 637915281524361132 5C39737447DA64EA

SALES POLICY:

Your bid is a contract: place a bid only if you're serious about buying the item. If you are the winning bidder, you will enter into a legally biding contract to purchase the item. If payment is not received within 7 days, item may be offered to the next highest bidder or relisted at the seller's sole discretion.

RETURN POLICY :

We offer 90 days(used) or 180 days(new) free warranty (except consumables).we stand behind every product we sell.If you're not pleased with your purchase, we'll be happy to make an exchange or refund the product price less S&H within 7 days of your purchase. For any exchange or refund, we need the original receipt or a record of the purchase in our system, and the product must be in its original condition, including the box, packaging and all accessories. Shipping and handling charges are not refundable.

International Buyers:

We are NOT responsible for any custom duty or import tax. However, we will try our best to minimize it.

Wir sind NICHT für irgendeine Zollgebühr oder Importabgabe verantwortlich.

Nous ne sommes pas responsables de tout droit de douane ni taxe d'importation.

About US:

We are professional EBAY sales team and lots of ebay buyers very satisfied with our services. You can enjoy top-quality product and high-quality services from us.