Washing:GoodComposition:TPU Hot melt adhesive + release paper
Thickness:0.1mm
Pressing temperature: 140-210 ° C
Pressing time: 15-20s
Pressure: 1.5kg-3kg
Application Instructions:
1.Strong bonding strength hot melt adhesive film--Used for seamless garment bonding and fabric material lamination.T-shirts, seamless shirts, jackets, fabric fit, seamless trench coats, badges, seamless pockets, etc.
2.High bonding streng,high elasticity hot melt adhesive film--Used for underwear,elastic fabric garment processing.
3.Water repellent hot melt adhesive film--Used for water-repellented outdoor clothing,seamless pocket,decorative pattern or badge.
4.Long lasting used anti-yellowing hot melt adhesive film--Used for white shoes/clothing material bonding.
Advantages
1.Strong adhesive force,double-side adhesive
2.Eco-friendly,non-toxic and non solvent
3.High flexibility,high water resistance
4.High elasticity and recovery,wearability,folding resistance
5.For small scale production,Iron-on, easy to operate at home, no special tools needed
For small scale production, repairs and patching the Tape can be applied using a Heat Press or Household Iron.
Double the length of tape than leak area for better sealing, Keep the adhesive side down and lay it on the leak, set temperature low-to-medium steam(polyester/nylon), get a wet cloth to cover up the tape and your suits, press the iron onto tape for 5-10 seconds when the iron is warmed up, repeat this process for 3-5 times until you see a whitened line around the tape edges.
Ideally apply the Tape to a small piece of waste fabric first to test adhesion strength - after test application and allowing
time for cooling pull the tape back and you should feel a strong resistance. For a good seal to be achieved the temperature
must be hot enough for the adhesive to be flowing / molten and pressure must be applied across the full width of the tape, use the iron again if needed.
Testing
1. Plastics-Determination of Cadmium-Wet Decomposition Method Supersedes EN1122:2001.
2. Passed Azo Dyestuff Test(Germany test)
3. European Council Drective 91/338/EEC
4. Rohs line with European standards
Waterproof seam tape a new level of protection
5.Excluding Vinyl Chloride Monomer
6.Passed En 71PART3:1994(European safety standard for toxic element)
7.Oeko-Tex Standard 100
8.Our products have passed certificate of REACH.SvHC
Thank you for your trust and choice to get your desired products from us and we hereby appreciated greatly to your valuable time for sharing
your thoughts on our products to help us improving ourselves.