Electric Vacuum Solder Sucker Drill Rod Desoldering Suction Pumps Iron Gun Tool
Detail
Condition 100% New and High quality
Type: Electric heating tin absorber
Material: plastic, stainless steel
Voltage: 110V/220V
Colour: blue
Product Description& Feature
1. High-quality materials, fine workmanship, longer service life, suitable for welding, electronic maintenance, automobile maintenance, etc.
2. Provides a good solution for enthusiasts and DIY enthusiasts, The tin suction device is light and strong, with strong suction; beautiful appearance, good airtightness of the suction cylinder, and can generally be operated with one hand, which is more convenient.
Instructions
1. Turn on the power and warm up for 3-5 minutes. Push down the piston handle to hold it, and align the front end of the suction nozzle of the soldering iron with the solder joint of the component to be removed. After the solder is melted, press the control button, and the solder will be sucked into the air cylinder.
2. When disassembling the air cylinder, press down the upper end of the air cylinder in the direction of the arrow, and pull the air cylinder and the handle apart at the same time, and the air cylinder can be separated. When removing the suction nozzle, rotate the suction nozzle counterclockwise to remove the suction nozzle. .
3. Before use, the suction nozzle and air cylinder should be tightened, and the solder impurities entering the suction nozzle and air cylinder should be removed frequently, and a little oil should be added to the piston.
4. After each use, push the piston 3-4 times to remove the residual solder in the suction tube, so that the suction nozzle and the suction tube are unobstructed for the next use.
Package Include
1* tin suction device
1* In addition to tin pin
1* Nozzle
We will reply your message or e-mail within 48 hours . Customers satisfaction is very important to us!
Please email or eBay message us before leaving any Negative and Neutral feedback or open any dispute on paypal.