Stage Lighting controller Software Control System:
1. USB-DMX signal decoding, stable 3PIN DMX output
2. Support decoding several USB-DMX

Introduction:
1. USB-DMX signal decoding, stable output
2. Support decoding several USB-DMX
3. Support PC or Offline operation mode option
4. Build 3D stage effect on the spot, 3D can be shown the light effect at the same time
5. Can be combined audio and video and light effect at the same time to build music show, dropping, moving & extending on the timescale audio and video to set start and ending time of light effect.
6. Provided USB with memory function, can be operated alone and activated the needed stage lighting memory.
7. Containing Fixture database.
8. Build your own Fixture data file or modify existing fixture data, all effects will be included (color, gobo rotating & prism and so on)
9. Supplied event-grade designed program with console
10. Can set every step running effect and running & break time
11. AVI output 3D lighting effect
On consideration of fully install this set system, we strongly suggest recommended computer
Laptop or desktop computer with USB port
Windows XP/Windows 7/Windows 10
800X600 screen resolution (suggest 1280X1024)
512M memory (suggest 1G)
Main clock frequency 800MHz (suggest 1.56GHz)
32M existing memory, support 3D software running VGA card (the latest series can be achieved the best effect)

Packing list for each unit:
1 x  Controller
1 x USB cable signal cable
1 x USB (driving software and manual book inside it)

Under WIN10 system install the software need to make setting before start. You need to prohibit the mandatory signature of the driver. Then turn on the computer and install the software. Then restart again.

How to install software to win10 system

1: click computer menu button and choose setting. Then enter into windows setting page.
2: you can see the final option. Recovery and setting. And enter it .
3: click button choose recovery and you can see re-start button. Click it.
4: after computer turn on again. You can see trouble shoot and enter into advanced options
5: then you can see start up setting. Click it and choose re-start again.
6: after computer turn on again. Then you can see the function 1-9. Choose No.7 (Disable driver signature enforcement). And make it continue. At this time you can install the software into computer.
7: at the same time you need to open the U disk file. Choose hard driver file and Universal USBDMX file. Open it you can see win7 32bit and 64bit plugin. Install one of them you want. And install another software name is Martin Universal USB-DMX DriverInstall. Then you can connect the martin light jockey controller and test.

Problem and solution


1: the software can easy install to winxp and win7 system. No need to make special setting to computer.
2: the win10 system need to close Disable driver signature enforcement function firstly. Otherwise the install will fail and no hardware found.
3: remember to install win7 32bits or 64bits plug in and Martin Universal USB-DMX DriverInstall.. otherwise that is easy to fail also.
4: if install still have problem. Please test in other computer also again.