500mm(w) x 800mm(h) Apollo Electric Anthracite Designer Towel Rail 300W Element
$444.00
Technical Specification
| Width (mm): | 500mm |
|---|---|
| Height (mm): | 800mm |
| Outer Finish: | Anthracite Powder Coat |
| Base Material: | Mild Steel |
| Guarantee: | 10 Years Euronorm BS EN 442 |
| Projection from Wall (mm): | 130mm |
| Bar Pattern: | 3 - 3 - 3 |
| Accessories: | Bleed Valves & Blank Plugs |
| See Description | For more information. |
Installation Instructions
NOTE: The electric element is NOT pre-installed and is packaged separately.
The towel rail must be filled with a water(85%) antifreeze (10%) mix with (5%) left for internal expansion. The element is then inserted to the bottom of the towel rail and is connected to mains electric via a fused spur box (not supplied). This is a relatively simple process and full instructions are provided.
**It is recommended that the installation of this product is carried out by qualified persons**
The towel rail must be filled with a water(85%) antifreeze (10%) mix with (5%) left for internal expansion. The element is then inserted to the bottom of the towel rail and is connected to mains electric via a fused spur box (not supplied). This is a relatively simple process and full instructions are provided.
**It is recommended that the installation of this product is carried out by qualified persons**
Description
Our Range of Electric Towel Rails are manufactured using the latest technology methods. Each product is subject to a strict QA process throughout manufacture and packaging.
When you purchase your chosen electric towel rail you will receive the following:
* x1 towel rail.
* x1 electric element.
* x1 Blank Plug
* x1 Instructions on how to fill the towel rail with solution.
PLEASE NOTE: The electric towel rail in this listing is not supplied pre-filled. The towel rail must be filled with solution before installing the element and turning it on. We recommend this is done by a qualified tradesman.