To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
© Fixaball
Fixaball sells all lengths of 1/2" UNC, socket cap screws/ bolts.
What is a socket cap screw/ bolt?
The, ‘Socket Cap Screw/ Allen Bolt,’ term is uséd to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head.
Orders placed before 2pm are dispatched same day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.
Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus.
UNC, 1/2" A2/ 304 Stainless Steel, Allen Socket, Cap Head Screw/ Bolt lengths available:
(FT - Fully Threaded, PT - Partially Threaded)
Size Description | Item Description |
1/2"-13x7/8",(FT) | SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 |
1/2"-13x1",(FT) | SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 |
1/2"-13x1 1/4",(FT) | SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 |
1/2"-13x1 1/2",(FT) | SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 |
1/2"-13x2",(FT) | SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 |
1/2"-13x2 1/4",(PT) | SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 |
1/2"-13x3",(PT) | SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 |
1/2"-13x4",(PT) | SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 |
*1/2"-13x4 1/2",(PT) | SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 |
*Request size
Material: A2/ 304 Stainless Steel
Material/ Finish |
Appearance |
Level of Corrosion Resistance |
Typical Application |
Self Colour A2/ 304 Stainless Steel |
Dull Shine, Grey |
High |
- External Weathering not prone to chemical exposure e.g. salt water |
UNIFIED THREAD STANDARDS
The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. They are a complete and integrated system of threads for fastening purposes. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size
Unified National (UN) thread form with a rounded root contour, applies only to external threads. (The UN thread form has a flat, or optionally, a rounded root contour.) The majority of fasteners with a Unified thread form (UNC UNF) have a rounded root contour i.e. are UNR threads.
Unified National Coarse (UNC) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a larger thread pitch than an equivalent diameter UNF thread. The unified thread is based on inch sizes and was first standardised in 1948 unifying the Whitworth and American standard thread forms.
Image is for illustrative purposes only.
Click the Postage tab above the listing description for more info
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
![]() |
PAYING VIA PAYPAL |
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase.
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
© Fixaball
Click the Postage tab above the listing description for more info
Accepted Payment Methods
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.