Replace and upgrade the damaged or worn original imitation leather cover. Make your car look brand new. This is a good protection for the shift knob cover.
The first layer is made of artificial leather, which is comfortable, breathable and gentle.
This is a non OEM product, only accessories!
Easy to install:
Maybe we need to do some simple sewing.
1. Place the leather sleeve on the gear and align it with the seam on the center console
2. Adjust the leather sleeve with the seam upward and the rear leather sleeve close to the gear
3. Adjust the left and right sides of the leather sleeve, and pull down diagonally to the seam to make the gap between the left and right seams as small as possible.
4. After adjusting both sides of the suitcase, there is still a little space in the middle, which is normal.
5. Both ends of the thread shall be punctured from the first hole on the top of the holster to the other end of the hole, from outside to inside
6. The needle and thread on the left side pass through the second row of skin holes on the right side from inside to outside
7. The needle and thread shall be crossed.
8. Unstitched - use the wheat ear knot to tighten it until the last row of skin holes are sewn
9. The needle and thread in the left row are repeatedly threaded into the last row from the outside to the inside, and the right central control is tightened, so is the right
10. At this time, the line should be pressed under the gun holster and tied to the dead line.
11. Cut the needle and thread short and leave a short section
12. Use a needle to plug the excess thread under the leather case to finish the sewing
Specifications:
Color: black
Size:
5 x 10 x 2.5cm/1.97 "x 3.94" x 0.98 "(L * H * D)
(Manual measurement, error is 1~2mm)
Material: artificial leather
fit:
Ford Escape 2013-2019
Ford Fusion (Fusion Hybrid Sedan, Fusion Energi) 2013-2016
Ford Focus 2012-2018
Ford C-Max Energi station wagon 2013-2017
Ford Carnival 2014-2019
Ford EcoSport 2018-2021
2015-2019 Ford
Package includes:
1 shift knob sleeve
Because cars of the same model may be produced differently in different countries. Please make sure that your car parts are the same as our pictures, otherwise they will not fit. If there are any differences, please contact us before purchasing, thank you!