Features:

Woolley ZBSA-TH temperature and humidity sensor can monitor the temp.and hum. of your house in real time, and you can view the data in real time through the ewelink APP no matter when and where you are. The zigbee protocol has the characteristics of a low-power microprocessor and can stand by for a long time.
It can also be used with other Woolley smart devices to control your household appliances in linkage. For example: plug in the zigbee socket for your fan, and then set up a smart scene on the APP. When the sensor monitors that the temperature exceeds a specific value, the fan will automatically turn on. Provide the most comfortable temperature and humidity for your house and enjoy our intelligent life.
It is widely used in various places and can be easily pasted to the wall through stickers. The installation is simple, light and compact. Easily set up and configure your smart life for easy control.

Monitor indoor temperature and humidity.
Sync the real-time temperature and humidity records to the APP.
Can trigger Wi-Fi devices in smart scene.
Add a camera to ensure you're aware of any emergency in your home.
Low battery notification.
Quick and easy to install.

Battery: 3V (CR2450);
Wireless protocol: Zigbee (IEEE 802.15.4);
Material: PC

Note 1：without batteries ，
Note 2：The zigbee sensor must be used with zigbee gateway

*The zigbee smart gateway is required for smart scene.

DIY Your Own Thermostat

For example:
Let the fan turn on automatically when the temperature exceeds 28 degrees Celsius;
When the temperature is lower than 10 degrees Celsius, let the heater turn on automatically.

Real-time Detection

Provide you with the most comfortable environment at all times through real-time detection.

Low-battery Notification

A notification will be pushed to you when the battery life is about 10%.

Support Selection of degrees Celsius/Fahrenheit

Switch the unit of temperature to Celsius/Fahrenheit is available as your wish.