10 Years’ Experience
Best Price Promised
Hassle Free Returns
Zipwall ZP4 ZipPole 10' Spring Loaded Pole 4 Pack for Zip Wall Dust Barrier System
ZipWall®10 spring-loaded dust barrier poles are strong and lightweight, telescope up to 10 feet high and twist to lock. They are an ideal dust protection solution for residential remodelling, renovation, and repair work. Contractors and DIY home owners alike find these poles easy to use, easy to store, and a significant time saver.
Each spring-loaded pole takes seconds to set up without a ladder. The innovative non-skid, non-marking head locks the barrier material onto the pole, allowing it to be raised with the pole, and holds it securely in place without damaging the ceiling. A tight dust barrier can be set up in just a few minutes, one pole at a time, without ladders, tape, or damage.
Four poles can be used to create a dust barrier up to 10 feet high and 30 feet wide, or a three-sided room-within-a-room. With the carry bag, the 4-Pack is a handy one to keep in every truck, and the perfect ZipWall®starter kit!
Key Features:
- Spring-loaded design for quick, easy, and safe setup
- Strong and lightweight stainless steel construction
- Telescope up to 10′ 3″ (from 4′ 2″)
- Innovative non-skid, non-marking head and plate
- Each pole weighs just 1.5 lb
- GripDisks™ prevent sliding on smooth floors
- Work with positive and negative air
- Help comply with the EPA RRP rule
Contents:
Four 10′ ZipPole®stainless steel spring-loaded dust barrier poles with parts (heads, plates, and GripDisk™ non-slip pads), two standard zippers with flap hooks, and one ZipWall®10 carry bag.Plastic sheeting is not included.
Tips for setting up a dust barrier:
- When using plastic, cut it to size ahead of time.
- Set up the barrier one pole at a time starting at the wall. Leave the plastic loose at the bottom and make sure the spring at the top of the pole is not compressed all the way.
Once ALL poles are in place, do the following:
- Tuck the plastic under each pole.
- Place a GRIP DISK on the floor under the pole.
- Compress the spring at the top of each pole all the way up.
IMPORTANT: Placing a GripDisk™ non-skid pad under each pole ensures the barrier will stay securely in place even on smooth floors or when used with negative air pressure.
Applications for ZipWall Dust Barrier Poles:
The ZipWall®dust barrier is used for dust protection in remodelling, renovation, restoration, painting, drywall, flooring, demolition, concrete cutting, sanding, and any interior job that generates dust. Beyond construction, the ZipWall®barrier system is widely used for abatement, mold remediation, water damage or flood restoration, and other interior jobs where contaminants in the dust are a concern. Another driver for the use of ZipWall®barriers is OSHA’s new Silica Rule for Construction which requires the implementation of dust controls.
Heavy users of ZipWall®products include professional contractors – general contractors and tradesmen – and facility managers. ZipWall®barriers can be found in healthcare facilities, hospitality and retail spaces, manufacturing, government and education buildings, transportation and property management buildings, and of course, in the residential market where the ZipWall®system originated.
- Brand: ZIPWALL
- MPN: ZP4
10 Years’ Experience
Best Price Promised
Hassle Free Returns
DJM Direct has been successfully running online since 2004 and during that time has built up a good relationship with both customers and Google. We understand most of our customers are working under pressure and need their orders as soon as possible and that's why we only use professional carriers. We have100% stock levels ensuring that our customers receive their orders in good condition and in the quickest time possible. We despatch all our products on a next working day delivery. DJM Direct is a family run business and offers a more personal service than national companies, going that one step further to meet all our customer expectations. All our staff have trade background and can answer all technical questions, to help make sure your purchase the right product for the application.
DJM Direct purchase in bulk and pass on the savings to our customers. Our prices are aimed to be very competitive on the internet market. We do however hold our own margin so we will continue to be trading for many years to come; providing an after service should you need it.
- DJM Direct have a 20,000 sqft warehouse
- DJM Direct stock 100 percent of our listings
- DJM Direct have designated members of staff to answer all your enquire via eBay messaging system.
- DJM Direct has account managers who load all products making sure prices compete with national companies and other large internet sellers.
- DJM Direct are always monitoring the service we provide, updating and changing if needed to ensure we maintain the highest level of customer service
Collection is available on request. Our opening hours are Monday - Friday 8am - 4pm
DJM Direct Payment Terms and Conditions
We accept Paypal, bank transfers and most major credit cards
DJM direct require immediate payment, and goods will only be shipped once payment is received in full.
DJM Direct Postage Terms and Conditions:
All deliveries are delivered the next working day via a 24 hour carrier (Excluding Bank Holidays and Weekends); your item must be paid for before 2.00pm to receive this service. Although we despatch the goods on a 24 hour service it is not always guaranteed.
Deliveries to The following postcodes - All BT & ZE including Shetlands, IV2-IV40, IV52-IV54 IV63, KW1-KW14 including ORKNEY ISLANDS, PA20-PA40, PH19-PH40, PH50, All Western Isles, IV41-IV51, IV55-IV56(Skye), KA27 & KA28, KW15-KW17, PA41-PA78, PH41-PH44 Isles of Scilly, Isle Of Man and Isle Of Wight, will have an extra charge of £15. We cannot ship items weighing over 30kg or longer than 1.5m going to any of these postcodes.
All goods need to be signed for, so please supply us with an address where somebody will be in to sign for the goods. Our carriers will not leave the goods without a signature.
You have to inspect the goods prior to signing for delivery, check the goods and refuse delivery if they are damaged. Please do not sign for goods and then report to us that they are damaged, as you will have to return the goods at your own expense.
If there is nobody in at the address to sign for the goods for a second time, you may have to collect them from a local depot or there may be a redelivery charge.
DJM Direct Returns Policy:
We only accept returns of goods that have a returns note which are filled in correctly with an RMA number. When returning any product you will have to upload the returns form from our website and then contact us for a RMA number.
Returning an item you have purchased by mistake or are not what you expected: We endeavour to provide as much information within the content of our product pages to allow you to make an informed decision on your purchase. However, should you require to return any product, we will allow you to do so within 14 days of the day after receipt. If you do this, you must upload a returns form from our website. Please fill this in including your RMA number and enclose with the returned goods. You will have to arrange the return of the goods yourself and track them using a reputable carrier at your own expense. We ask that you do everything possible to ensure the goods are returned to us in good condition and in their original packaging. We will refund in full the total cost of the goods, when we receive the items back in a resaleable condition.
Returning an item that is faulty in the first 30 Days: If we have supplied an item that is faulty or goes faulty in the first 30 days of receipt you must upload a returns form from our website. Please fill this in including your RMA number and enclose with the returned goods. We will arrange the uplift of the goods on a day convenient for you (Monday to Friday). Should we and the manufacturer upon receipt of the said items be satisfied as to the alleged defects we will either replace the goods or arrange a refund of the full value of the goods.
Returning an item that is under manufacturer warranty, but is over the 30 days of receipt: If we have supplied an item that goes faulty after 30 days of receipt, you should contact the manufacturer to resolve the issue. If the manufacturer cannot resolve the issue please contact us via eBay messaging system. You may be asked to upload the returns form from our website. Please fill this in including your RMA number and enclose with the returned goods. You will have to arrange the return of the goods yourself and track them using a reputable carrier at your own expense. Should we and the manufacturer upon receipt of the said items be satisfied as to the alleged defects we will repair, replace or arrange a refund of the full value of the goods.
Returning an item that we have supplied incorrectly: If we have supplied an item incorrectly we need to be notified within 14 days of receipt. You will have to upload a returns form from our website. Please fill this in including your RMA number and enclose with the returned goods. We will arrange the uplift of the goods and have the correct item sent out at the same time on a day convenient for you (Monday to Friday). Although this will be arranged on the same day, it is not guaranteed the collection driver will be the same driver delivering the goods.
A member of our staff are always happy to help, should you need any more information.
Please contact us via eBay messaging system.
| ebay listing template design by |  |