Epistar LED Bulb 3 Watt Cool Long life FOR Sears Craftsman C3 19.2 V Lights
Our LEDs are bright, efficient, very long battery run time, cool running, and long life bulb that may never need replacement.
Stop: We recommend the Brighter 320 lumen LED for the C3 light the Cree 5-Watt LED (PR-5W-30VDC)
Cree 5 Watt XPG3, XP-G3 LED Bulb Torch FOR Sears Craftsman C3 19.2 V Work Lights
This Cree® XP-G3 LED Delivers More Lumens
This is 3-Watt Epistar 250 LUMEN LED PR Bulb to upgrade Sears C3
Our Epistar 3 Watt LED Bulb for Sears is 250 Lumen LED which was tested for direct compatibility in the C3 light. We found Craftsman C3 light construction with all plastic holder makes LED run hotter than other lights and can damage ordinary LEDs by over-heating. (We add a heat conductive spacer or compound on this LED to improve heat dissipation for you). Also, please exercise care in changing bulbs as plastic lens / bulb retainer of the C3 can be damaged by ruff re-assembly.
for superior brightness, efficiency, and longevity for Less ---
| LED UPGRADE For the Following Rechargeable Work lights and Replacement Bulbs: | |||||
| Work Light Upgrade For: | Bulbs Upgrade For: | ||||
| Sears Craftsman | 911391 009-11391 315.113913 | 19.2v | Sears Craftsman | 911009 | 16.8v-18v |
| 911213 | 19.2v | ||||
| Sears Craftsman is a registered trademark of KCD IP, LLC, Draco Products is not affiliated with KCD IP, LLC © 2014-2020 Draco Products. All Rights Reserved | |||||
Simply replace your existing bulb with this LED – no modifications necessary!
*Please note, LED bulb will be bright but not as bright as highest power Krypton or Xenon bulb over 10 watts.
- Universal Voltage Works with standard flashlights and Work Lights 9 Volt to 30 Volts
- Standard DC Polarity (+) on bottom contact or Flange !
- Minimizes battery and bulb replacement waste
- Focusability of flashlight is preserved with these point source LEDs
- Brighter Light for improved vision for enhanced visibility of fine detail
- Longer battery life from high efficiency LED
- Long lamp life 50,000 hours of continuous use
- Dependable and shock resistant
- Easy To Install
INTENSE BRIGHT LIGHT output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times.
FOCUSABILITY These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.
MAXIMUM EFFICIENCY These LEDs are powered below their maximum rating for longer life and higher lumens per watt of battery power.
LONGER BATTERY LIFE results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens / watt. These LED maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to an amber light.
INDESTRUCTIBLE LED performance and lifetime operation. Unlike incandescent bulbs with a thin fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.
EASY TO INSTALL as if just replaces your existing bulbs - no modifications necessary
Standard PR Incandescent vs. LED
See the difference!
|
|
1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage. | |
| |
2) Warning! - For safety always follow manufactures safety and operational instructions. | |
| |
3) Caution! - Remove batteries, turn-off or disconnect power before changing bulb. | |
|
*EPISTAR is a trademark of EPISTAR Corporation
*CREE is a trademark of Cree, Inc.
* Draco Products is not affiliated with Epistar Corporation or Cree, Inc.
☛ · Buy two now and save with discounted shipping, the right bulb is hard to find, why not get two?
This is a very popular style of bulb for Many Work Lights, flash lights, and work lights
Standard Polarity LED with bottom contact Positive!
The Lamp has a STANDARD 'PR' Base - P13.5s is flanged base, 9.2mm Diameter, with flange "V" notch
*Specifications, and applications for this standard bulb are too numerous so purchaser is responsible for compatibility with their actual product.
"There are 100's of satisfied customers on this LED type alone.
We provided exemplary customer service and satisfaction guarantee"
★ Thank You. Please return a positive review for good service, Thank You.
© 2014-2022 Draco Products. All Rights Reserved
FEEDBACK
- Very good replacement bulb over the incandescent light bulb.
- Fits, works way better than the OEM Very happy!!