Specifications:
Model No. | : | ZT210 |
Description | : | Gasoline Engine |
Max. Power Output | : | 7.5hp / 5.1kw / 3600rpm |
Rated Power Output | : | 6.0hp / 4.4kw / 3600rpm |
Type | : | 25° Inclined Single Cylinder, 4 stroke, OHV, Horizontal Shaft, Forced Air-Cooling |
Cylinder Dia. × Stroke | : | 70mm ×54mm |
Displacement | : | 210ml |
Compression Ratio | : | 8.5:1 |
Max. Torque | : | 14N.M / 2500rpm |
Ignition Mode | : | Non-Contact Transistor Magneto |
Starting Mode Options | : | Recoil / Electric |
Engine Oil Capacity | : | 0.6L |
Fuel Capacity | : | 3.6L |
Recommended Fuel Type | : | unleaded gasoline |
Recommended Engine Oil | : | SAE 10W-30 |
Fuel Consumption Rate | : | 360g / kw.h |
Carburetor Type | : | Float Carburetor |
Fuel Suppling Mode | : | Gravity Feed |
Lubrication Mode | : | Splashing |
Power Output Form | : | crank shaft 1:1 |
Output End of Crank Shaft | : | Metric Thread 20mm |
Crank Shaft Rotation Direction | : | Clockwise (view from flywheel) |
Air Filter Type | : | Semi-Dry |
Dimension | : | 390mm×330mm×350mm |
Weight | : | 15kg |
Description
1. Easy to start carburetor, low fuel consumption.
2. With oil alarm.
3. With memory function, high sensitivity
Remark: Add enough oil before starting, otherwise the machine will be automatically turned off to protect the machine.
4. Iron camshaft
5. After 100 consecutive hours of intensive running test, it is durable.
6. Anti-low temperature treatment pull wire 100% nylon does not lint.
7. The soft rubber handle of the handle does not hurt the hand, and the metal frame is more textured.
8. Air filter is a common air filter
9. Thick silencer has good drying effect
10. Threaded fuel tank cap, with a nitrile rubber gasket under the fuel tank to prevent vibration from damaging the fuel tank, suitable for construction machinery such as impact rafts
11. The air filter gasket is made of rubber, which makes the carburetor tighter, does not leak, and has better performance.
12. Wide snap ring prevents the tubing from being damaged by heat
13. The crankshaft is a keyway shaft 20mm in diameter, and there is a tiller spline shaft 25 to choose from.