6x cable connector Wire connectors (blue) and 2x plug -in terminals (red)- original Scotchlok 314 and 951 from 3m®
- Repair Connection of a cut wire/installation of the search cable/connection of the cable to the charging station
- no isolation of the cable necessary due to the proven U-Contact principle
- With gel filling (314): Waterproof , moisture resistant , weather resistant
- For all Bosch® Indego Lawnmower models: Indego 350, Indego 350 Connect, Indego 400, Indego 400 Connect, Indego 800
The two cable ends of the cut-out cable must be pushed into the connector all the way to the end .
The 3rd hole can be released or is available for a search cable (depending on the model-please check with the lawnmower manufacturer).
Depending on the damage, if necessary must be used in addition to a piece of cable or the cable guide can be changed slightly.
Then the blue part must be completely pressed in (the simplest way with a combination pliers) in order to ensure a permanent connection.
To connect to the charging station, place the end of the cable in the U-contact of the terminal and press together. (depending on the model-please check with the lawnmower manufacturer)
The same cable connectors are also sold by Husqvarna/Gardena for their Rasenmäherroboter (article-No.: 501980201).
Manufacturer's Specifications:
- temperature, operating max.: 140 °c
- temperature, operating min.:-40 °c
- Max diameter wire: 3, 94mm
- Rated current 15a
- Up to 600 V
| Alternatives | Suitable Accessories |
|
|
 powered by plentymarkets Make e-commerce yours. |
When you purchase this item your data will be transmitted to and saved in plentymarkets (www.plentymarkets.eu) for checkout purposes. plentymarkets is an E-Commerce ERP system provider. Your data will be exclusively used for the checkout process of your purchase. plentymarkets will not disclose, sell, share or transfer your data to any third party. |