Applicable to Tuffking's second-generation wireless tattoo power supply, motor pen power supply, RCA motor machine OLED power supply

 

 

Item Description

Condition: 100% New and Highquality
Type: Power Supply
Size: 77*28mm
Output voltage: 4-12V, 0.1V adjustment
Display: OLED-0.5 inch / resolution 88*48
Battery capacity: 1300mAh
Working time: about 6 hours/8V
Charging time: about 3 hours
Charging interface: TYPE-C/5V/1A

 

Product Description& Feature 

1. The new generation of Tuffking wireless battery is an upgraded version on the basis of the first generation. The LED light display is upgraded to an OLED display screen, and RCA and DC interfaces are used for different machines;
2. The circuit hardware and software algorithms have been upgraded, the voltage range is wider, the adjustment is more accurate and fast; Two startup modes are designed, namely, normal startup and enhanced startup, to adapt to different application scenarios;
3. OLED high resolution display screen, rich and clear display content; It has charging overcharge protection, pin clamping protection, output short circuit protection, and text reminder on the display screen for various abnormal conditions.

 

Instructions

1. Connect the battery to the machine.
2. Boot start/pause: There are 2 boot modes. In shutdown state, long press the power button to enter the normal startup mode, then press the power button to start the machine, and then press the power button to stop the machine; in the shutdown state, double-click the power button to enter the enhanced startup mode. Press the power button again to start the machine, rise to 10V in 0.2 seconds and then drop to the current set voltage, and then press the power button to stop the machine.
3. Shutdown: long press the power button to shut down in the power-on state, it will automatically shut down for 5 minutes without output, and automatically shut down within 5 minutes with output and no load. When the battery is less than 5%, it will alarm that the battery is too low, and then shut down.
4. Voltage adjustment: click the + button to increase the voltage, 0.1V to increase, long press the + button to quickly increase the voltage; click the - button to decrease the voltage, 0.1V to decrease, long press the - button to quickly decrease the voltage; voltage range 4- 12V.
5. Charging: Plug in the TYPE-C charging cable to charge, the display will prompt "Charging" when charging, and "Charge complete" will be displayed on the display after charging is complete.

 

 

Package including

1 * Tattoo Power Supply
1 * USB Cable