Model
|
IG-1000
|
Type
|
DIN rail mount
|
Main unit/Expansion unit
|
Main unit
|
Analog output
|
Yes
|
Power consumption
(including analog
current output)
|
Normal
|
2700 mW or less (at 30 V: 90 mA or less)*1
|
Power saving function (HALF)
|
2300 mW (at 30 V: 77 mA or less)*1
|
Power saving function (ALL)
|
2200 mW (at 30 V: 74 mA or less)*1
|
Digital display method
|
Dual 7-seg display
Upper level: Red, 5 digits
Lower level: Green, 5 digits
|
Display range
|
-99.999 to +99.999, -99.99 to +99.99, -99.9 to +99.9, -99 to +99 (selectable)
|
Display resolution
|
1 μm 0.04 Mil, 10 μm 0.39 Mil, 100 μm 3.94 Mil, 1,000 μm 39.37 Mil (selectable)
|
Output
|
Judgement output
(selectable between NPN and PNP)
|
NPN (PNP) open collector x3ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less,
N.O./N.C. selectable Max. 50 mA/ch *2
|
Response time (judgement output)
|
1.96 to 4031.72 ms *3
|
Edge check output
(selectable between NPN and PNP)
|
NPN (PNP) open collector x1ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less,
N.O./N.C. selectable Max. 50 mA, *2 response time 20 ms
|
Analog output
(selectable among ±5V, 1-5 V,
0-5 V, 4-20 mA)
|
Voltage output
|
Output range
|
±5 V (full scale 10 V)
|
Output resistance
|
100 Ω
|
Maximum load resistance
|
―
|
Repetition accuracy
|
±1 mV
|
Display accuracy
|
±0.05% of F.S.
|
Temperature characteristics
|
±0.005% of F.S./°C
|
Update cycle
|
Same as sensor head sampling cycle
|
Response time
|
Same as Response time (judgement output)
|
Time constant
|
10 μs (90 % response)*4
|
Current output
|
Output range
|
4-20 mA (full scale 16 mA)
|
Output resistance
|
―
|
Maximum load resistance
|
350 Ω
|
Repetition accuracy
|
±1.5 μA
|
Display accuracy
|
±0.25% of F.S.
|
Temperature characteristics
|
±0.01% of F.S./°C
|
Update cycle
|
Same as sensor head sampling cycle
|
Response time
|
Same as Response time (judgement output)
|
Time constant
|
30 μs (90 % response)*4
|
Input
|
Gain input
|
Input time: 20 ms or more, Response delay time: 120 ms or less (Nonvolatile memory (EEPROM) 1.5 s or less)
|
Reset input
|
Input time: 20 ms or more, Response delay time: 20 ms or less
|
Timing input
|
Input time: 2 ms or more, Response delay time: 2 ms or less
|
Zero shift input
|
Input time: 20 ms or more, Response delay time: 20 ms or less
|
Bank A input/Bank B input
|
Input time: 20 ms or more, Response delay time: 20 ms or less *3
|
Laser emission stop input
|
Input time: 2 ms or more, Response delay time: 2 ms or less
|
Rating
|
Power voltage
|
10 to 30 VDC, including Ripple (P-P) 10 %, Class 2 or LPS
|
Environmental resistance
|
Pollution degree
|
2
|
Ambient temperature
|
-10 to +50 °C 14 to 122 °F (No freezing)
|
Relative humidity
|
35 to 85 % RH (No condensation)
|
Vibration resistance
|
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
|
Material
|
Main unit case/Front sheet: Polycarbonate, Key top: Polyacetal, Cable: PVC
|
Accessories
|
Main body × 1, Instruction manual × 1
|
Weight
|
Approx. 150 g (including supplied items)
|
*1 The power consumption with slave units installed is the total of each amplifier unit's power consumption.
*2 When expansion units are added: Max. 20 mA/ch
*3 For more details, refer to the User's Manual.
*4 Delay time that occurs from the analog output circuit after the judgment is output.
|