Description:
100% brand new and high quality.
Universal AC input / full range.
It's good quality & high performance.
Input: AC110/220V 50/60Hz.
100% full load burn-in test.
Protectives: overload/ over voltage/ short circuit.
Cooling by free air convection.
How to Calculate Support max LED Strip Length:
Assumption: Your LED Strip 60LEDs/m, and each LED 0.2W, then calculate max LED Strip Length: 0.2W/LED × 60LEDs/m=12W/m, 60W(this listing)÷12W/m=5m, So, Support the LED Strip(60LEDs/m, 0.2W/LED) Length (Max)=5M ( Indoor use only! Not suggest for use in bathroom!)
Connection:
L, N: AC Power Input
GND: DC Power Output "-"
V: DC Power Output "+"
+V / ADJ: Adjust the Output Voltage
Safety Compliance: CCC/ FCC / CE
Working Temperature: 0~40°C
Storage Temperature: -20~60°C
Ambient Humidity: 0~95% Non-Condensation
Type(Output) & Size:
24V 2A 50W 4.3*2.95*1.38in
24V 5A 120W 6.22*3.86*1.65in
24V 6.2A 150W 7.8*3.86*1.65in
24V 8.3A 200W 7.8*3.86*1.65in
24V 10A 250W 198 x 98 x 42mm / 7.8 x 3.86 x 1.65in
24V 12.5A 300W 7.8*4.33*1.97in with Internal Fan
24V 15A 360W 8.39*4.45*1.97in with Internal Fan
24V 17A 400W 8.39*4.45*1.97in with Internal Fan
24V 20A 500W 8.39*4.45*1.97in with Internal Fan
24V 25A 600W 8.39*4.45*1.97in with Internal Fan
Package Included:
1 x Switch Power Supply Driver For LED Strip Pixel light
Note:
This is a DC 24V Power Supply Unit for professional use on LED lightning, Security Surveillance System, CCTV Security Camera, IP Camera, and etc.
Safety design with shortage Protective, overload Protective and auto voltage switching.
Regulated voltage & current output. This is a perfect choice to use as a LED Driver for all type of LED lighting 3.without flickering light & ensue the life span of your LED.
Full range of current output is possible for LED lighting with dimmable function.
Voltage output fine adjustment is available for different power condition.
About Calculate Method:
If Your LED Strip 60LEDs/m, and each LED 0.2W, then calculate max led Strip Length: 0.2W/LED × 60LEDs/m=12W/m, 24W(this listing)÷12W/m=2m,
So, Support the LED Strip(60LEDs/m, 0.2W/LED) Length (Max)=2m
Special Note:
This Power Supply Unit "DOES NOT" come with installation instruction, wiring cable,on/off switch, or screws.
Professional Installation of qualified electrician is highly recommended.
Note:
IN-DOOR USE ONLY!
No installation instruction, wiring cable, on/off switch, or screws come with. Professional installation of qualified electrician is highly recommended.