SET OF 2 adapters for BMW, Mini, Toyota Supra, & Nissan GTR. Fits into the standard rectangular jacking points on these cars to safely support the vehicle while your working on it. Beveled top block, so it will self align as you lower the jack, because jacks often lower on an curved path. Fits most all 3 ton jack stands and some 4 ton stands. Know fitments are listed below. PLEASE REFER TO PICTURE WITH THE BLACK BACKGROUND TO VERIFY FITMENT IF YOUR JACKSTAND IS NOT ON THE BELOW LIST. Please add your particular jack stand model in feedback so I can add to this list. Fully assembled unlike "China copies". Plating will not chip, and scratch like competitors powder coat.
Sold in the following versions:
UNIVERSAL SMALL - FITS 1.5-2.5 TON ADAPTERS https://www.ebay.com/itm/333512163307
UNIVERSAL MEDIUM - FITS 3-4 TON ADAPTERS - THIS AUCTION that your looking at now
UNIVERSAL LARGE - FITS 6-12 TON ADAPTERS https://www.ebay.com/itm/333619330665
This auction is just for the adapters and not the entire jack stands. Top rectangular block measures .550" x 1" x 2"
Comes with 1 3/4" long bolts which works for 95% of all jack stands, works best with post thickness between 7/8" - 1 1/4" (with a few exceptions listed below)
- Torin big red 3 ton (Online, Tractor supply Co)
- Torin black jack 3 ton (Walmart)
- Daytona 3 ton Heavy duty jack stands (Harbor Freight)
- Pittsburgh 3 ton aluminum jack stands (Harbor Freight) MAY NEED A SLIGHT RELIEF (1/16") IN THE VERY CENTER TO KEEP IT FROM SLIGHTLY ROCKING ON CENTER BOLT. This is due to the center relief not being very deep on this model jack stand.
- Pittsburgh 3 ton steel jack stands (Harbor Freight)
- DuraLast 4 ton jack stands (Autozone)
- Prolift 3 ton jack stands (you will need shorter 1 1/2" long bolt though) -MENTION TO US IF YOU HAVE THIS MODEL
- Amazon Basics 3 ton jack stands (you will need longer 2" long bolts though) -MENTION TO US IF YOU HAVE THIS MODEL
- Power Torque 2 ton jack stands (Oriley auto parts)
- Craftsman 3 ton double locking (ACE hardware)
- Evercraft 3 ton jack stands (NAPA)
- TEQ 3 ton stands
- KS Tools 3 T (160.0370) (Europe)
- Husky 3 ton jack stands (Home Depot)
- OCT 3 ton jack stands
- Omega Lift (Model #32038) 3 ton jack stands
- Safe guard (Model #63030) 3 ton jack stands
Made with pride in Dayton, OH USA from 11 (1/8") gauge zinc plated steel and 6061-T6
VISIT OUR STORE TO SEE ALL OF OUR PRODUCTS (It's the little blue door next to our feedback count, next to username)