1A 2S-10S Inductive Active Equalizer Balancer Li-ion LiFePo4 Battery Pack Storage
Energy Transfer Balance Balancing Equalization Board
Description:
1> This module is an adjacent battery voltage difference equalizer, It can not be used as a repair tool. It should be connected to the battery and used with the battery protection board. It generates voltage difference by charging and discharging to trigger the balance board to work and realize energy transfer balance.
2> The balance module is suitable for batteries with a capacity smaller than 30AH.
3> The balance module is suitable for ternary lithium battery type and lithium iron phosphate battery type.
4> No external power supply required.
5> When connecting the plugs of 13 or more strings of wires, insert the balance board diagonally. Contact the B- pin first, and then insert the other pins diagonally in turn, Otherwise, it is very easy to damage the balance board.
Parameters:
Applicable Battery Type: Ternary lithium battery / Lithium iron phosphate battery
Single Battery Voltage Range: 3.0V-4.2V
Equalization Principle:
This module is an adjacent battery voltage difference equalizer. When the voltage difference between adjacent batteries is greater than 0.1V, the internal chip triggers the balance to work, and stops working when the voltage difference between adjacent batteries is less than 0.03V.
Equalizing Current:
0.1V<Adjacent battery voltage difference<0.2V , Equalizing Current: 0.5A-0.7A
Adjacent battery voltage difference>0.2V , Equalizing Current: 1.0A
Voltage Equalization Accuracy: Adjacent battery voltage difference 30mV(Typical value)
LED Indicator Status:
LED ON: Equilibrium in progress
LED OFF: End of equilibrium
LED Flashing: Poor Connection / Circuit Fault
Each adjacent battery corresponds to a LED indicator, the working state is clear.
Dormant Current: 10uA
Working Temperature: -20℃ ~ +60℃
Board Size:
Wiring Example:
Packing List:
1pcs x Inductive Active Equalizer Balancer
1set x Wire