$899.99MSRP THPW2000-ETL  (Powers up to 20 Amps)

Includes: 

THOR Pure Sine Wave inverters have set the standard with the way you deal with your mobile power needs, providing AC electricity. A power inverter converts the DC electricity from batteries into everyday AC power. With a THPW2000-ETL THOR inverter you won’t need to rely on DC-powered electronics or a generator to have power for tools, electronics, or any AC power needs.

THOR Pure Sine Wave inverters are efficient and dependable and come in numerous sizes and power ranges to meet your mobile power demands. We offer compact, higher powered models that yield enough power for larger vehicles such as utility & work trucks, RV’s, boats, & renewable energy applications.

THPW2000-ETL Specifications

• Model: THPW2000-ETL
• Name: PW Series
• Spec.:12V DC to 115V AC(2000W)

Input Property

• DC input voltage rating: 12V DC
• DC input voltage range: 10.7 – 16.5 Vdc
• No load current draw: <0.8 A
• Low battery voltage alarm : 10.5V DC
• Low battery voltage shutdown : 9.5 V DC +/- 0.5
• Low battery voltage recovery : 12 V DC
• High battery voltage shutdown : 16.5V DC +/- 0.5
• High battery voltage recovery : 14V DC
• Fuse (internal): 25A×12(MAX)
• Input reverse protection Yes

Output Property

• Output voltage range: 120V AC (RMS): 110V AC (RMS):
• Output frequency: 60Hz
• Output wave form: Pure Sine Wave
• Max output power: 2200W
• Continuous output power: 2000W
• Overload protection power: 2000W
• Surge capacity (Peak power): 4000W
• Pure Sine Wave Output: THD<3%
• USB output: DC 4.75V-5.25V @ 0-2.1A

General Characteristics

• Display: Input voltage , Output Power
• Efficiency (except power loss on the wire): >85%
• Over load protection: Yes
• Short circuit protection: Yes
• Over temperature shutdown: ~65℃
• Operating temperature range: -5-40℃
• Storage temperature range: -20-50℃
• Operating relative humidity: 10%-90%
• Storage relative humidity: 5%-95%
• AC Sockets: GFCI outlet / 1 Hard wire Block
• Cooling: By fan

Product Summary:

• Bar Code Number: 852090008806
• Packaging: Box
• Dimension: 15.50L x 8.5W x 6.5″H
• Net weight: 14.75lbs

Low Voltage Disconnect (RELAY NOT INCLUDED)

THOR Manufacturing’s, 12V/24V Low Voltage Disconnect switch is a solid state electronic module designed to protect batteries from excessive discharge. Think of them much like a surge protector, but instead of terminating the connection when voltage spikes, they disconnect when voltage drops too low, preventing damage to the batteries and load.

Inverter already has a lot voltage disconnect at 9.5 volt, this upgrade is to extend the battery life or if the same battery is maybe used as a start battery for an Boat, RV, car etc. with this programmable switch the disconnect voltage can be set higher to leave enough power to start the engine.

The 12V/24V low voltage disconnect when used with a relay will automatically disconnect and reconnect loads based on battery voltage. No operator action required. This prolongs battery life by preventing damage due to excessive discharge.

The LVD switch continually monitors battery voltage then disconnects the load when low voltage is sensed. Extends battery life by preventing over-discharge and protects equipment from operating at potentially low voltages. Configurable settings from 10.5 to 12V.

Features:

• No more dead batteries!
• Automatically Disconnects any drain on the battery (when Voltage drops to desired cutoff point), leaving starting power.
• No button to push, or raising the hood.
• Proven technology protecting vehicle battery alternators, electrical system and much more!

Specifications

• Input Volts: 12V or 24V low voltage disconnect
• UPC Code: 00898440002209
• 12 & 24 Volt applications
• 30 second Delay Timer
• Over-current shut off
• Over voltage protection
• Durable case
• Weather resistant
• 4-wire terminal configuration
• Dimensions: 4.75” x 2.25” x 1.25”
• Compact size with mounting bracket
• Electronic, solid state design (means no moving parts to wear-out)
• Low voltage battery disconnect designed to withstand harsh automotive environments

Product Summary:

• Bar Code Number: 898440002209
• Packaging: Box
• Dimension: 4.25L x 2.25W x 1.5H

THANLFB-200 $34.99MSRP

• Highly cost effective solutions for 50 – 500 amp fusing
• Multiple Fuse Amperage Available
• ANL Fuse Holder Amperage: 200 amps @ 48 Vdc
• Fuses Rated at 32 Vdc. Holder Max Voltage: 48 Vdc
• 200 AMP ANL Fuse Holder Kit includes one ANL fuse holder and two (2) terminal insulators, hardware and clear center cover
• ANL fuse holder includes terminal insulators that protect conductive areas from accidental shorts, complying with ABYC / USCG requirements
• Connection Post Material : Stainless Steel
• Base Material: Glass filled nylon
• Connection Post: Stainless steel
• Lock Washer: Stainless steel
• Flat Washer: Brass

Product Summary:

• Bar Code Number: 853003006193
• Packaging: Box
• Dimension: 4L x 4W x 4H
• Net weight: .5lbs