Welcome
Product Description
Features: 1. Color Temperature: 3000K Yellow / 6000K Pure White / 8000K Cool White.(The Original Color Light is 6000K White, You Can Change the Color of Film to Get 3000K or 8000K) 2. Complete Kit: Ballast/Driver Included,FAN-less,Built-in temperature control Technology. 3.Easy installation, Plug and Play, NO modification required.360°adjustable Socket to provide correct light pattern. 4.High quality Aluminum heat dissipation ensures the secure temperature range. 5. Low Power Consumption than Halogen bulb, Energy Saving. 9. Low Voltage Protection, High Precision Constant Current driver Chip. 7. Light point is close to the original luminous light spot, closer to the original car light effect type. 8. Our 50W LED headlights are brighter than the 100W Original Halogen lights. 9. Reduce the electromagnetic interference,Reduce the impact of radio waves. are friendly to the car radio. 10. Smart Efficient Cooling System, Fan-less design,no noise caused by fan, 40% increase in heat dissipation than normal products,Built-in intelligent temperature control system chip,Ensure the LED light long lifespan.
Package include:
2x LED Headlight Bulbs
2x Ballast/Driver
1x Manual
Fitment:
Socket Type: H11/H8/H9
Fit For SUV,Bus,Off-road,ATV,UTV,UTB,Wagon,Forklift,Truck,Motorcycle,Motorbike,Bike,Car,Van,Truck,Pickup
Attention:
If you want to use LED bulb on some European vehicles, and the following issue occur on it, those are NOT problems of LED bulb and NOT covered by warranty. It means you may need to buy a set of load resistor:
--Hyper Flashing
--Error code shows up
Please contact with us if you still have any questions.
Important Notice:
This item wasn't exist self-decoding/self-Canbus【anti-flashing /anti-warning】function and DRL【Daytime running light】 function!!!
-- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases:
1. the headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked).
2. the on-board computer(ECU) reports an error, the central control panel displays an error icon or displays bulbs burns out error message.(Resistance decoding may worked)
3. The bulbs does not work. What you can do is connect the bulbs to12V DC ,it can work normally(Resistance decoding may worked).
situation 1: use this case to judge whether it need to be decoded.
situation 2:use this case to judge whether is a reverse polarity plug(turn bulb's plug 180° to insert into headlamp and turn on to test)
Feasible Solution:
1. Install the decoder; the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger.
2. Install the resistor, you need professional installation.
3. Using ODM to read the error information code of the ECU on-board computer, through programming means, correct the error information to achieve the decoding effect.
Please mind to check whether the installation space is sufficient.
Some parts need to be removed before install this item to make enough installation space for it.
It may be necessary to replaced the customize dust cover of your headlamp.
Install Cautions
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8. Please install car headlight dust cover to ensure the normal operation of the lamp (to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system)
After installation, dust prevention measures must be done, LED lamp life depends on the cooling performance is good or bad. The lamp heat mainly active cooling (fan-cooling based, supplemented by the whole aviation aluminum heat dispassion ) as the main cooling method, the life of the fan in lamp bulb directly affects the life of LED lights.
Customer Attention: This model don't come with CANBUS Error Free function.The load equalizer (canbus)can be used to eliminate the hyper flash (higher frequency turn signal) caused by LED replacement bulbs in some vehicles.Corrects hyper flashing and bulb-out warning caused by LED replacement bulbs.
The brand of vehicles shows Below that they will be hard to install and require modification and will require specialized technician for proper installation,also they will need canbus. 1. Volkswagen, 2. Mercedes-Benz, 3. Audi, 4. BMW, 5. Dodge Ram 2015-2017, 6. Dodge Charger 2015-2017, 7. GMC, 8. Acadia 2007-2017, 9. Ford 2015-2017 FAQ Q1: Will the bulbs suitable for my vehicle? A:1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above. 2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand. 3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit! Q2: What if I encounter a dashboard error message or flickering? A: All the Bevinsee LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem. Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly. A:Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor. Q4: How to get the best light output? A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page. Q5: What should I do if there is a quality problem? A: Please send ebay message to us, we will solve any problems for you as soon as possible. Q6: The bulbs doesn't fit my vehicle. A:1. The bulbs size maybe wrong, pls double check before order. 2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you. Q7: Warrning about polarity A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect.
DISCLAIMER
Disclaimer: Bevinsee parts are not sponsored or endorsed by, or
affiliated with the brands its parts fit, including Porsche, Subaru,
Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet,
GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury,
Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi,
Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo,
Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn,
Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram,
Rover, Skoda, Harley, Mini, Smart, Scion, Renault, Seat, Peugeot,
Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat,
Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special
Vehicles, Hyundai, Trabant, Citroën, Yamaha, Polaris, Can-am, Arctic
Cat, Kawasaki, Ski-Doo, Harley-Davidson, KTM, Duke, Husaberg, Husqvarna,
Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli,
Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco, etc.
Payment Policy
Shipping Policy
Return & Refund
Feedback
About Item
Customer Satisfaction
|