This product is a special fixture for Ford MondeoAccessories are a 1.2 milling cutter 1.2 guide pin 2.5 Milling cutter a back mold

I briefly describe the replication and preparation process: first, assemble the delivered milling cutter and guide pin on the vertical milling machine, and clamp on the vertical milling machine fixture in turn; Mondeo has a total of 6 keys, each piece has only four bevel angle tooth numbers, and the corresponding 1,2,3 and 4 of each tooth number angle are also expressed in our fixture. So how to determine the angle of each tooth number? Experienced masters can confirm by basic visual inspection. If a new hand is used, it is necessary to insert the key into the fixture and measure the data one by one. As shown in the following figure, insert the key into the fixture, after turning the key, each film is guaranteed to be 180 degrees horizontal with the fixture. Look at the scale number of the fixture and take notes. And so on.

After each record, the fixture on the right only plays the role of guide rail, and the corresponding one is that when preparing, the guide rail of the fixture on the left and right can be parallel with the milling cutter.