These page shows the long shaft version of X2216 motors.
Stator Diameter | 22mm | Rotor Diameter | 27.7mm |
---|---|---|---|
Stator Thickness | 16mm | Body Length | 34mm |
No.of Stator Slots | 12 | Max Lipo Cell | 3-4S |
No.of Rotor Poles | 14 | ESC | 50A |
Motor Kv | 880 | Recommended Prop(inch) | APC11*4.7 /APC1047 /APC9047/APC9045 |
No-load current | 0.5A/10V | Weight for aerobatics airplane | 850g(4S 9060\1047\1050) |
Motor Resistance | 89mΩ | Single weight for multirotors | 500g(3S 1038\1047) |
Max Continuous Current | 32A/30s | Single weight for multirotors | 550g(4S 8038\8043\8045\9047) |
Max Continuous Power | 450W | Weight for 3D airplane | 800g(3S 1147) |
Weight | 67.5g |
Prop(inch) | Voltage(V) | Amps(A) | Thrust(gf) | Watts(W) | Efficiency(g/W) | RPM | Load temperature in 100% throttle |
---|---|---|---|---|---|---|---|
APC11*4.7 | 11.1 | 0.6 | 100 | 6.66 | 15.02 | 2230 | 75℃ 2min10s |
1.6 | 200 | 17.76 | 11.26 | 3054 | |||
2.8 | 300 | 31.08 | 9.65 | 3618 | |||
4.1 | 400 | 45.51 | 8.79 | 4119 | |||
5.65 | 500 | 62.715 | 7.97 | 4558 | |||
7.4 | 600 | 82.14 | 7.30 | 4945 | |||
9.2 | 700 | 102.12 | 6.85 | 5287 | |||
11.2 | 800 | 124.32 | 6.44 | 5640 | |||
13.7 | 900 | 152.07 | 5.92 | 5967 | |||
16.1 | 1000 | 178.71 | 5.60 | 6193 | |||
23.4 | 1320 | 259.74 | 5.08 | 6975 | |||
APC9060 | 14.8 | 0.7 | 100 | 10.36 | 9.65 | 3288 | 66℃ 3min |
1.6 | 200 | 23.68 | 8.45 | 4513 | |||
2.8 | 300 | 41.44 | 7.24 | 5393 | |||
4 | 400 | 59.2 | 6.76 | 6125 | |||
5.3 | 500 | 78.44 | 6.37 | 6899 | |||
6.8 | 600 | 100.64 | 5.96 | 7450 | |||
8.4 | 700 | 124.32 | 5.63 | 7940 | |||
10.1 | 800 | 149.48 | 5.35 | 8503 | |||
12.1 | 900 | 179.08 | 5.03 | 8945 | |||
14.4 | 1000 | 213.12 | 4.69 | 9372 | |||
19.9 | 1290 | 294.52 | 4.38 | 10547 | |||
APC9045 | 11.1 | 1 | 100 | 11.1 | 9.01 | 3430 | 63℃ 5min |
2.1 | 200 | 23.31 | 8.58 | 4770 | |||
3.3 | 300 | 36.63 | 8.19 | 5857 | |||
4.7 | 400 | 52.17 | 7.67 | 6750 | |||
6.35 | 500 | 70.485 | 7.09 | 7426 | |||
8.1 | 600 | 89.91 | 6.67 | 8081 | |||
10.6 | 737 | 117.66 | 6.26 | 8836 | |||
14.8 | 0.7 | 100 | 10.36 | 9.65 | 3446 | ||
1.6 | 200 | 23.68 | 8.45 | 4757 | |||
2.7 | 300 | 39.96 | 7.51 | 5836 | |||
3.7 | 400 | 54.76 | 7.30 | 6639 | |||
4.9 | 500 | 72.52 | 6.89 | 7450 | |||
6.3 | 600 | 93.24 | 6.44 | 8067 | |||
7.8 | 700 | 115.44 | 6.06 | 8600 | |||
9.5 | 800 | 140.6 | 5.69 | 9234 | |||
11.2 | 900 | 165.76 | 5.43 | 9696 | |||
13.05 | 1000 | 193.14 | 5.18 | 10117 | |||
16.3 | 1180 | 241.24 | 4.89 | 10972 | |||
APC1047 | 11.1 | 0.7 | 100 | 7.77 | 12.87 | 2664 | 100℃ 1min25s |
1.8 | 200 | 19.98 | 10.01 | 3654 | |||
3 | 300 | 33.3 | 9.01 | 4328 | |||
4.4 | 400 | 48.84 | 8.19 | 4933 | |||
6 | 500 | 66.6 | 7.51 | 5405 | |||
7.55 | 600 | 83.805 | 7.16 | 5881 | |||
9.6 | 700 | 106.56 | 6.57 | 6300 | |||
11.6 | 800 | 128.76 | 6.21 | 6683 | |||
13.75 | 900 | 152.625 | 5.90 | 6988 | |||
16.2 | 1000 | 179.82 | 5.56 | 7364 | |||
18.2 | 1105 | 202.02 | 5.47 | 7718 | |||
14.8 | 0.6 | 100 | 8.88 | 11.26 | 2664 | ||
1.3 | 200 | 19.24 | 10.40 | 3598 | |||
2.3 | 300 | 34.04 | 8.81 | 4350 | |||
3.4 | 400 | 50.32 | 7.95 | 4945 | |||
4.7 | 500 | 69.56 | 7.19 | 5501 | |||
6 | 600 | 88.8 | 6.76 | 5853 | |||
7.6 | 700 | 112.48 | 6.22 | 6255 | |||
9.05 | 800 | 133.94 | 5.97 | 6700 | |||
10.9 | 900 | 161.32 | 5.58 | 7026 | |||
12.8 | 1000 | 189.44 | 5.28 | 7403 | |||
16.95 | 1200 | 250.86 | 4.78 | 8003 | |||
22.1 | 1400 | 327.08 | 4.28 | 8625 | |||
27.2 | 1650 | 402.56 | 4.10 | 9247 |