E8030 is a high quality and durable AC voltmeter with
accuracy class of 2.5%.
Measurement range: 0-7500V (0-7.5kV). Size (L x W): 80x80mm. Panel setting.
Connection method - with voltage transformer 6000/100V.
Average life service time is 12 years. Warranty: 1 year. Overload resistant!
Made in Russia. Quality meets the requirements of
Russian certification system.
Due to design specifics of measuring mechanism and high-quality plastic case
(IP54) device is vibration and shock
proof. It can be used outdoors because the case of E8030 is protected from
getting dust on measuring mechanism and from rain and water splashes.
Temperature range from -50 ˚ C to +60 ˚ C.
This device is NEW (not used). I have a lot of device in my stock.
Biggest part of them is 2015-2017 year
of manufacture.
Please read this description till the end:
1. You will understand why device E8030 costs more than cheap ammeters and
voltmeters.
2. You will see E8030 benefits over its cheaper analogs.
Device’s photos may not coincide with nominal value because of the large number
of available ranges.
You will receive device in accordance with the ordered range.
Photos of device E8030:
Side view Top view
![]() ![]() |
![]() ![]() |
E8030 is universal device for AC voltage or amperage measurements.
E8030 can be milli ammeter, mikro ammeter, ammeter, kilo ammeter, mikro
voltmeter, voltmeter, kilo voltmeter.
Take a look at all available measuring ranges of the E8030 device.
Type of the
device |
The values of
the measuring range |
Nominal
frequency |
Connection
method |
Ammeter E8030 |
0-100mA, |
50Hz, |
Direct |
0-10A, |
With current
transformer 1/5A |
||
Voltmeter E8030 |
0-10V, |
50Hz, |
Direct |
0-1.75kV |
With voltage
transformer 1500/100V |
||
0-7.5kV |
With voltage
transformer 6000/100V |
||
0-12kV |
With voltage
transformer 10000/100V |
||
0-600V, |
with additional resistor R85 |
It is possible to make other ranges for your request.
E8030 can have direct and indirect connection method (through shunt or additional resistance).
All required shunts and additional resistance are also available in stock.
If you need shunts, transformers or additional resistance please contact me.
Please take a look at shunts, transformers and additional resistance at my Ebay store, using the link:
Ammeters, voltmeters, watt meters, var meters, phase meters with other typical sizes are also available in stock: 40х40mm; 48х48mm; 60х60mm; 72х72mm; 80х80mm; 96х96mm; 120х120mm; 160х160mm; 30x30mm; 32х100mm; 37х38mm; 40х21mm; 42х42mm; 50х25mm; 53х46mm; 54х21mm; 63х63mm; 74х26mm; 80x120mm; 83х83mm; 85х85mm; 88х60mm; 90х100mm; 96х30mm; 100х30mm; 120х30mm; 120х60mm; 120х105mm; 121х131mm; 125х110mm; 140х42mm; 144х144mm; 160х30mm; 160х60mm; 160х80mm; 160х140mm; 160х175mm; 230х180mm; 240х30mm; 250x120mm.
Device test before shipment:
All devices are tested in our certified laboratory before shipment.
AC
ammeters and voltmeters testing are provided with high precision ammeter D553 or voltmeter D50152 and AC/DC generator U300.
Testing equipment accuracy class is 0.02%.
Testing
method: Output signal value of voltmeter D50152 is compared to the nominal value
on device E8030. Nominal value is that, where is the pointer of device E8030.
For example, will show several stages of AC voltmeter E8030 testing with measurement range
of 0-250V.
Connection method on devices with such measuring range is direct.
We need to set control voltmeter on 300V limit of measurement.
Maximum value of the scale on the control voltmeter is 150V.
This means we need
to multiply all values by 2.
Control points will be 80V, 100V, 150V, 200V, 250V.
Value of the control voltmeter: 38V.
Value displayed on E8030: 80V.
E8030 relative error:
(80V-38V*2)/(150V*2)*100%=1.33%.
Permissible error: 2.5%.
Conclusion: device E8030 is in accuracy class.Value of the control voltmeter: 49V.
Value displayed on E8030: 100V.
E8030 relative error:
(100V-49V*2)/(150V*2)*100%=0.66%.
Permissible error: 2.5%.
Conclusion: device E8030 is in accuracy class.Value of the control voltmeter: 74V.
Value displayed on E8030: 150V.
E8030 relative error:
(150V-74V*2)/(150V*2)*100%=0.66%.
Permissible error: 2.5%.
Conclusion: device E8030 is in accuracy class.Value of the control voltmeter: 99V.
Value displayed on E8030: 200V.
E8030 relative error:
(200V-99V*2)/(150V*2)*100%=0.66%.
Permissible error: 2.5%.
Conclusion: device E8030 is in accuracy class.Value of the control voltmeter: 123V.
Value displayed on E8030: 250V.
E8030 relative error:
(250V-123V*2)/(150V*2)*100%=1.33%.
Permissible error: 2.5%.
Conclusion: device E8030 is in accuracy class.
Testing conclusion: voltmeter E8030 corresponds to accuracy class 2.5%.
This model even corresponds to accuracy class of 1.5%.
Ammeters and voltmeters E8030 are more expensive than other cheap analogs.
That’s because it has high accuracy and high reliability.
Technical characteristics of E8030 exceed over characteristics of other cheap devices.
If you need reliable, exact and durable measuring
device,
then you should buy E8030.
If you are looking for a cheap indicator with low
accuracy
then choose cheap analog indicators.
To make your choice easier, please take a look at a comparative table of device
E8030 and cheap voltmeter.
Parameter |
E8030 |
Cheap device |
Accuracy class |
±2.5% |
±5% or
±3.5% |
Mean time between failures |
92250 hours. |
12500 hours. |
Overload resistance |
The device can withstand for
2 hours of load equal to 120% of the upper measurement range limit. |
Research was carried out: |
Case |
High-quality, shock resistant
plastic. Do not crack or crumble by shocks. |
Cheap plastic. It cracks from
impact or fall. |
Front panel |
Natural glass scratch resistant.
Contains calcium oxide, which provides additional material strength. |
1. Plastic. Has no resistance
to scratches and cracks. |
Weight |
250g. |
100g. |
Weight with package |
300g. |
110g. |
Content of non-ferrous and precious
metals: |
||
- aluminum |
22g. |
7g. |
- copper |
25g. |
9 g. |
- silver |
Silvered contacts 0.018g. |
No silver. |
Manufacturer |
Plant "VZEP", Belarus.
Known throughout the Commonwealth of Independent States. |
Small factory. |
Manufacturer price per one item |
About 8USD. |
2.5-3USD. |
Warranty |
1 year |
No warranty or up to 1year. |
If you haven’t found some
technical information please take a look at full listing of E8030.
If you need some additional
information please contact me.
Ammeter E8030, voltmeter E8030
E8030 ammeter, E8030 voltmeter
- panel meter coil system for measuring current and voltage in the AC power
lines on mobile and
stationary objects.
Accuracy class: 2.5.
Overall dimensions: 80 x 80 x
70mm.
Vibration, impact resistant,
splash-proof.
Ammeters E8030 and voltmeters E8030
have a measuring mechanism of the magnetoelectric system with an in-frame
magnet and a movable part on the cores.
The measuring ranges of the E8030
devices, and their connection methods are described in table below:
Type of the
device |
The values of
the measuring range |
Nominal
frequency |
Connection
method |
Ammeter E8030 |
0-100mA, |
50Hz, |
Direct |
0-10A, |
With current
transformer 1/5A |
||
Voltmeter E8030 |
0-10V, |
50Hz, |
Direct |
0-1.75kV |
With voltage
transformer 1500/100V |
||
0-7.5kV |
With voltage
transformer 6000/100V |
||
0-12kV |
With voltage
transformer 10000/100V |
||
0-600V, |
with additional
resistor R85 |
Ammeters
E8030 and voltmeters E8030 under the influence of various factors can admit the
following errors in measurements:
- 0.5% of the basic error limit for every 10 ° С - when the ambient air
temperature changes from normal (20 ± 5) ° С to any temperature within the
operating temperature range from -60 ° С to + 60 ° С;
- 2.5% of the reading when exposed to high humidity 95% at a temperature of 35
° C;
- 2.5% of the reading when the frequency deviation is ± 10% of the normal
frequency (limits of the normal frequency range);
- 2.5% of the reading when the ammeter position changes from its normal
position in any direction by 45 °.
Power consumption for the E8030 is:
1.5W - for ammeters;
4W - for voltmeters with a measuring range from 0-7.5V to 0-250V;
6W - for voltmeters 0-500V;
8W - for voltmeters with a measuring range 0-600W.
Operating conditions E8030
Ammeter
E8030 and voltmeter E8030 designed for use at temperatures from -50 º C to +60 º
C.
Relative air humidity should not exceed 95% (at +35 ° C).
Panel
meter E8030 are made in a splash-proof body.
Devices E8030 are made in the splash-proof body and are capable of
withstanding:
- vibration acceleration - 3g, with frequency 30Hz;
- shaking acceleration - 7g.
Positioning and mounting E8030
Ammeters
E8030 and voltmeters E8030 are designed for flush mounting on vertical or
horizontal panels made of both magnetic and non-magnetic materials.
When
mounting E8030, the following rules must be
adhered to:
-
installation of equipment should be made carefully, without distortions;
- the
mounting of E8030 ammeters and E8030 voltmeters on the panel must be rigid and
do not create additional loads;
- the
panel meter should be located away from sources of strong magnetic fields with
a strength above 0.4 kA/m;
-
devices intended for connection to the network with voltage above 650V are
mounted on insulators in a place inaccessible to touch.
The
manufacturer guarantees that the devices meet the requirements of the technical
conditions while observing the operating, storage, transportation and
installation conditions.
The E8030
ammeter and E8030 voltmeter comply with the requirements ensuring safety of
life, consumer health and environmental protection.
This
device also can be named as: E 8030, E-8030, ammeter, amp meter, ampmeter, amperemeter, ampermetr,
kiloampermeter, miliampermeter, microampermeter, kilo ammeter, miliammeter,
microammeter, volt meter, voltmeter, kilovoltmeter, milivoltmeter, panel meter.
Photos
If
necessary we can take photos of a device from various angles.
Technical Documentation
In
case you didn't find in technical specifications for the device all necessary
information you are interested in, feel free to contact me. I will look through
the technical documentation for the device and I will be happy to consult you.
Also I
may speak directly with the manufacturer and find out more specific information
about this product.
If
some technical parameters for the device (error, accuracy, measuring range,
operating voltage and frequency) do not meet your requirements, please, e-mail
me and I will negotiate with the manufacturer whether it is possible to deliver
you a device on the desired specifications without a cost increase and in the
shortest time.
On
delivering the device, electric circuit diagrams and all technical
documentation for operation, calibration and maintenance will be supplied. Also
there will be documents that testify the accuracy and compliance with
specifications.
In
addition, translation of technical documentation into the customer’s language
may be discussed.
Delivery set
On
delivering the device will be completely ready for use.
There
are all necessary cables, adapters, sensors and spare parts as envisaged in
technical documentation. Hence, there is no point in purchasing any additional
repair & measurement equipment.
Warranty
Warranty
of this item - 12 month.
Before
sending a device, all devices are checked whether they comply with all
technical specifications.
Highly
qualified metrology engineers carry out the check-up of every instrument at a
specialized laboratory and with the help of master gages.
If
necessary, we can send you photos or video with the check-up process.
I ship
only fully working devices complying with all parameters.
The
warranty for this device is 1 year from the date of shipment from my warehouse.|
Within 1 year term I will provide the repair of the device for free in case of
manufacturing defect or when the technical parameters do not comply with
technical documentation. You will have to pay only for delivery.
When a
device is out of order due to your fault (its fall, it is flooded with water,
the power supply does not meet the specified technical requirements, input
signals exceed the norm, etc.) or there are conspicuous marks of casing opening
(broken warranty labels), it is considered a non-warranty repair.
Within
1 year term we can advise you for free on the device operation.
After-warranty service
After
the expiration of the warranty I can arrange a paid repair and technical maintenance
of a device as well as I can sell you all necessary spare parts for repair at
minimum prices. I always have them in stock.
Packaging
Immediately
after checking, the device will be wrapped in several layers of strong
air-bubble film and placed into a strong cardboard box. Extra cardboard plates
will be used for fixation.
If
necessary, wooden box or pallet may be used. For a more reliable fixation foam
can be applied. The whole box will be placed in a waterproof polyethylene bag
which will be wound with several layers of packing tape.
A
special handle will be made for ease of transportation.
Thus,
I guarantee qualitative and conscientious packing of the device that reduces to
minimum the possibility of damaging during transportation.
Discount (from-10% to -90%)
I
suggest you a device which is unique in its class and price category with the
following specifications: accuracy, measurement range, error, temperature
operating conditions, endurance and durability (military performance, aluminum,
stainless steel, titanium or carbolite casing, shock and vibration resistance,
high maintainability and reliability), free measuring kit (cables, adapters,
load, fuses, etc.), 1 year warranty.
Unused
cheap devices with the same specifications, accuracy and durability do not
exist.
If you
consider the price for this device unreasonably high, and you know the similar
equipment at a lower price, please, let me know.
I will
help you to compare these two models. In case your model (which is cheaper) is
the same as the device I suggest or even it is better, then
I guarantee to sell you a unit at that cheaper price with additional 10%
discount.
Shipping details
Please,
mind that I ship from Ukraine (Europe, GMT+02:00), so that the shipping time may
differ from your local time.
I send
goods via AirMailpost.
App.
delivery time:
Europe:
7-15 days;
USA,
Japan&others - 10-20 days (depends on a country).
I will
ship in 2-3 business days after payment clearance.
The
goods may also be delivered by the express mail services such as DHL, UPS,
FedEx, TNT or EMS.
With
express delivery you will mostly receive your goods within 3-7 business days.
Payment details
I
expect payment in 4 days after the auction ends.
I
accept a PayPal payment as the safest way of payment (preferably).
If you
do not have a PayPal account you can pay by wire transfer to my credit card.
Other
options of payment are acceptable, for example in case of pickup way of
shipping, I can accept cash payment.
(This
will be an official purchase on eBay).
Please,
tell me if you cannot pay in time, we can always negotiate it.
When
purchasing a few items, you’ll save on shipping.
Return policy
I
accept refunds and returns. If there is something wrong with the device,
please, inform me within 5 days after receiving it.
I will
refund your costs or send you the other item, as you wish (after I receive
the previous item).
Serious
bidders only, please!