Device meter RLC E7-14  analog of  Lutron, Advantest, Avtech, HP Agilent, NoiseCom, General Radio, Boonton, Anritsu, Fluke and general Electric, but  has the same or better characteristics.

This device can be used for wide measurement range.

RLC Meter E7-14 is designed to measure immitance parameters of electro radio components: resistors, capacitors, inductors.

    Device operating frequency 0.1, 1 and 10 kHz with installation accuracy  not more than 0.01%
    Two signal measurement levels, V:  2 + 0,4(40 + 8)х 10-3
    Signal source output resistance, Ohm: 100 ± 20

    Digital RLC meter E7-14 is designed to measure immitance parameters of electro radio components: resistors, capacitors, inductors. Device RLC meter E7-14 measures the following immitance parameters:
    - Parallel and series capacitance (CP, CS);
    - Parallel and series inductance (LR, LS);
    - Parallel and series resistance (RP, RS);
    - Parallel conductance (G);
    - Loss factor (D);
    - Quality factor (Q).
 
    Device immittance meter E7-14 can operate in organized in-line community systems. It is used for input and output radio components control, circuit elements research parameters and semiconductor structures, immittance measurements comparison, physical quantities measurements with the help of sensors transducers.
    Four pair objects inclusion in the measuring circuit provides high metrological characteristics of digital device RLC meter E7-14. Low-level signal mode presence allows device to measure non-linear objects. It is possible to supply mixing voltage on the measured object from the internal (to № B) and from external (to 120) sources.
    Digital meters RLC E7-14 average successive measurements results to increase the resolution. Can work as part of AIC by KOP.

Condition: NEW (not used, an old stock). Tested and 100% workable.

If necessary, we can provide calibration certificate from Government standardization institute (+145-265usd).

Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. 

Please take a look on my other items!

If you haven’t found the needed item in my listing, please contact me. I’ll try to help you.

Technical characteristics of device meter RLC E7-14:      

Operating frequency 0.1, 1 and 10 kHz with installation accuracy of not more than 0.01%

Two levels of signal measurement, V

2+0.4(40+8) ·10-3

Signal source output resistance, Ohm

100±20

 

Capacitance C at frequency 0.1; 1; 10 kHz

Measurement range

0.1

1

10

1

0.0001-1.6000 nF

0.01-160.00 pF

0.001-16.000 pF

2

0.001-16.000 nF

0.1-1600.0 pF

0.01-160.00 pF

3

0.01-160.00 nF

0.001-16.000 nF

0.0001-1.6000 nF

4

0.0001-1.6000 mkF

0.01-160.00 nF

0.001-16.000 nF

5

0.001-16.000 mkF

0.1-1600.0 nF

0.01-160.00 nF

6

16.000-160.0 mkF

1.6000-16.00 mkF

160.00-1600 nF

7

0.16000-1.600 mF

16.000-160.0 mkF

1.6000-16.00 mkF

8

1.600-16.00 mF

160.0-1600 mkF

16.000-160.0 mkF

Inductance L at frequency0.1; 1; 10 kHz

Measurement range

0.1

1

10

1

1.6000-16.00 kH

160.00-1600 H

16.000-160.0 H

2

160.00-1600 H

16.000-160.0 H

1.6000-16.00 H

3

16.000-160.0 H

1.6000-16.00 H

160.00-1600 mH

4

1.6000-16.00 H

160.00-1600 mH

16.000-160.0 mH

5

160.00-1600 mH

16.000-160.0 mH

1.6000-16.00 mH

6

0.01-160.00 mH

0.001-16.000 mH

0.1-1600 mH

7

0.001-16.00 mH

0.1-1600 mkH

0.01-160.00 mkH

8

0.1-1600.0 mkH

0.01-160.00 mkH

0.001-16.000 mkH

E7-14 Loss factor and quality factor is measured in the range from 10-4 to 104 

Measurement range

G

R

1

0.0001-1.000 mkCm

1.000-10.00 MOhm (up to 1000 MOhm)

2

0.001-10.000 mkCm

100.00-1000 kOhm

3

0.01-100.00 mkCm

10.00-100.0 kOhm

4

0.1-1000.0 mkCm

1.0000-10.00 kOhm

5

0.001-10.000 mCm

100.00-1000 Ohm

6

10.000-100.0 mCm

0.01-100.0 Ohm

7

100.00-1000 mCm

0.001-10.000 Ohm

8

1.0000-10.00 Cm

0.1-1000.0 mOhm

Immittance measurement parameters acceptable basic error limit at high signal level and normal measurement speed

Capacity, С

 

Measurement range

Frequency, kHz

Measurement accuracy

 

1

0.1

1; 10

10-3(1+D)С+3·10-4С’

10-3(1+D)С+2.5·10-4С’

 

2-5

0.1; 1; 10

10-3(1+D)С+2·10-4С’

 

6.7

0.1; 1; 10

[10-3(1+D)+2·10-3 С/С’]С

 

8

0.1

1; 10

[10-3(1+D)+3·10-3 С/С’]С

[10-3(1+D)+2.5·10-3 С/С’]С

 

Inductance, L

 

1

0.1

1; 10

[10-3(1+D)+3·10-3 L/L’]L

[10-3(1+D)+2.5·10-3 L/L’]L

 

2-5

0.1; 1; 10

[10-3(1+D)+2·10-3 L/L’]L

 

6-7

0.1; 1; 10

10-3(1+D)L+2·10-4 L’

 

8

0.1

1; 10

10-3(1+D)L+3·10-4 L’

10-3(1+D)L+2.5·10-4 L’

 

Resistance, R

 

1

0.1

1; 10

[10-3(1+Q)+3·10-3 R/R’]R

[10-3(1+Q)+2.5·10-3 R/R’]R

 

2-5

0.1; 1; 10

[10-3(1+Q)+2·10-3 R/R’]R

 

6-7

0.1; 1; 10

10-3(1+Q)R+2·10-4 R’

 

8

0.1

1; 10

10-3(1+Q)R+3·10-4R’

10-3(1+Q)R+2.5·10-4R’

 

Conductance, G

 

1

0.1

1; 10

10-3(1+Q)G+3·10-4G’

10-3(1+Q)G+2.5·10-4G’

 

2-5

0.1; 1; 10

10-3(1+Q)G+2·10-4G’

 

6-7

0.1; 1; 10

[10-3(1+Q)+2·10-3 G/G’]G

 

8

0.1

1; 10

[10-3(1+Q)+3·10-3 G/G’]G

[10-3(1+Q)+2.5·10-3 G/G’]G

 

Loss factor, D

 

1

0.1

1; 10

10-3(1+D2)+3·10-4 (1+D) С/С’

10-3(1+D2)+2.5·10-4 (1+D) С/С’

 

2-5

0.1; 1; 10

10-3(1+D2)+2·10-4 (1+D) С/С’

 

6-7

0.1; 1; 10

10-3(1+D2)+3·10-3 (1+D) С/С’

 

8

0.1

1; 10

10-3(1+D2)+3·10-3 (1+D) С/С’

10-3(1+D2)+2.5·10-3 (1+D) С/С’

 

Quality, Q

 

1

0.1

1; 10

10-3(1+Q2)+3·10-3Q (1+Q) L/L’

10-3(1+Q2)+2.5·10-3Q (1+Q) L/L’

 

2-5

0.1; 1; 10

10-3(1+Q2)+2·10-3Q (1+Q) L/L’

 

6-7

0.1; 1; 10

10-3(1+Q2)+2·10-4Q (1+Q) L/L’

 

8

0.1

1; 10

10-3(1+Q2)+3·10-4Q (1+Q) L/L’

10-3(1+Q2)+2.5·10-4Q (1+Q) L/L’

 

 

С`, L`, R`, G`, D`, Q`- maximum values in measurement limit

 

Power supply Е7-14

AC power 220V, 50Hz/400Hz.

 

Operation mode setup time, min

15

 

Power consumed by device, VA

not more than 40

 

Operating conditions:

 

 

- temperature, °С

From  5 to 40

 

- humidity, %

80

 

- atmospheric pressure mm. Hg.

630 - 795

 

Device dimensions, mm

254х314х184

 

Device weigh, kg

5

 

 

Warranty 12mounth. 

Delivery term

This device is available in stock right now.

I can send it at one day after your payment.

But due to the fact, that this device is of high precision, it should be calibrated before shipping.

I calibrate and test all my devices.  Calibration time may take from 1-14 days. (depends on device, usually it takes 3 days.).

I can send it at one day after your payment but without any calibration. Please chose.

I can supply you such device of fresh years of manufacture 2011-2012, but the price of such device will be approximately 20-40% higher or more.

 This device also can be named as:  E7-14, E7 14, E714, е7-14, е7 14, е714. 

         Photos

If necessary we can take photos of a device from various angles.

      Technical Documentation

In case you didn't find in technical specifications for the device all necessary information you are interested in, feel free to contact me.  I will look through the technical documentation for the device and I will be happy to consult you.

Also I may speak directly with the manufacturer and find out more specific information about this product.

If some technical parameters for the device (error, accuracy, measuring range, operating voltage and frequency) do not meet your requirements, please, e-mail me and I will negotiate with the manufacturer whether it is possible to deliver you a device on the desired specifications without a cost increase and in the shortest time.

On delivering the device, electric circuit diagrams and all technical documentation for operation, calibration and maintenance will be supplied. Also there will be documents that testify the accuracy and compliance with specifications.

In addition, translation of technical documentation into the customer’s language may be discussed.

            Delivery set

On delivering the device will be completely ready for use.

There are all necessary cables, adapters, sensors and spare parts as envisaged in technical documentation. Hence, there is no point in purchasing any additional repair & measurement equipment.

           Warranty

Warranty of this item - 12  month.

Before sending a device, all devices are checked whether they comply with all technical specifications.

Highly qualified metrology engineers carry out the check-up of every instrument at a specialized laboratory and with the help of master gages.

If necessary, we can send you photos or video with the check-up process. 

I ship only fully working devices complying with all parameters.

The warranty for this device is 1 year from the date of shipment from my warehouse.

Within 1 year term I will provide the repair of the device for free in case of manufacturing defect or when the technical parameters do not comply with technical documentation. You will have to pay only for delivery. 

When a device is out of order due to your fault (its fall, it is flooded with water, the power supply does not meet the specified technical requirements, input signals exceed the norm, etc.) or there are conspicuous marks of casing opening (broken warranty labels), it is considered a non-warranty repair.

Within 1 year term we can advise you for free on the device operation.


          After-warranty service

After warranty termination I can arrange a paid repair and technical maintenance of a device as well as I can sell you all necessary spare parts for repair at minimum prices. I always have them in stock.

           Packaging

Immediately after checking, the device will be wrapped in several layers of strong air-bubble film and placed into a strong cardboard box. Extra cardboard plates will be used for fixation.

If necessary, wooden box or pallet may be used. For a more reliable fixation foam can be applied. The whole box will be placed in a waterproof polyethylene bag which will be wound with several layers of packing tape.

A special handle will be made for ease of transportation.

Thus, I guarantee qualitative and conscientious packing of the device that reduces to minimum the possibility of damage during transportation.

         Discount (from-10% to -90%)

I suggest you a device which is unique in its class and price category with the following specifications: (accuracy, measurement range, error, temperature operating conditions), endurance and durability (military performance, aluminum, stainless steel, titanium or carbolite casing, shock and vibration resistance, high maintainability and reliability), free measuring kit (cables, adapters, load, fuses, etc.), 1year warranty.


Unused cheap devices with the same specifications, accuracy and durability do not exist.

If you consider the price for this device unreasonably high, and you know the similar equipment at a lower price, please, let me know.

I will help you to compare these two models. In case your model (which is cheaper) is the same as the device I suggest or even it is better, then
I guarantee to sell you a unit at that cheaper price with additional 10% discount.

 

       Shipping details:

Please, mind that I ship from Ukraine (Europe, +2), so that the shipping time may differ from your local time.

I send goods via AirMailpost.

App. delivery time :

Europe – 7-15 days;

USA, Japan&others – 10-20 days (depends on a country).

I will ship in 10-15 business days after payment clearance.

The goods may also be delivered by the express mail services such as DHL, UPS, FedEx, TNT or EMS.

With express delivery you will mostly receive your goods within 3-7 working days.

 

           Payment details:

I expect payment in 4 days after the auction ends.

I accept a PayPal payment as the safest way of payment (preferably).

If you do not have a PayPal account you can pay by wire transfer to my credit card.

Other variants of payment are acceptable, for example in case of pickup way of shipping, i can accept cash payment. 

(This will be an official purchase on eBay).

 Please, tell me if you cannot pay in time, we can always negotiate it. 

When purchasing a few items, you’ll save on shipping. 

 

        Return policy:

I accept refunds and returns. If there is something wrong with the device, please, inform me within 5 days after receiving it.

I will refund your costs or send you the other item, as you wish (after I receive the previous item).

Please only serious bidders!