This kit includes 

3kg primer (enough for the concrete)

14kg concrete mass 12m2

1L of varnish (enough for the concrete)

Trowel can be added at an extra cost 

 This concrete is for indoor use.The Jeger Concrete decorative effect is a unique solution that will give the walls an extremely industrial character.Decorative concrete on the wall can contain characteristic such as pitting and cavities, which leads to the illusion of real concrete.

How to apply


1.On a clean, dry, dust-free and degreased wall, apply the primer to the wall. Wait 4 hours for the primer to dry.

2.Mix the concrete thoroughly. Do not dilute the concrete, it is ready for use. Apply a thin, smooth layer of the concrete on the wall with a trowel. If you want to make pitting, place and remove the trowel from the freshly applied mass. Then, gently smooth the entire surface. If you want to change the effect, after about 4 hours you can apply another layer and repeat the whole process. Allow to dry for about 12 hours .

3.When the concrete is dry , apply the varnish protector with a roller.

Note : If more than one bucket is used then mix all the buckets together to make sure to get one shade of colour.