Jecod DC Return Pumps

These pumps are designed to be ultra quiet for submerged pump applications.

The key features of these pumps are detailed below:

  • 8 Speed Controller
  • Controller incorporates electronic detection of error conditions and visual warnings.

Features

  • DC-650 (8W) Maximum flow rate of up to 650 litres/hour
  • DCS-1200 (10W) Maximum flow rate of up to 1,200 litres/hour
  • High performance motor with innovative electronics resulting in power savings up to 65%
  • Ultra quiet
  • Electronic detection of no water enables automatic power off protection
  • Motor protection if rotor is blocked
  • Can be used in Marine and Freshwater applications
  • No copper elements
  • Long operation life is achieved by the use of wear resistant ceramic shaft
  • Soft start operation - pump gradually builds up to set flow rate
  • Feed mode disables pump for 10 minutes
  • 8 speed settings

Technical data

DC 650

Voltage: DC 24V

Watts: 8

Max. Flow Rate: 650 (l/h)

Max Head Height: 1.5 (m)

Package: 125x120x90 LxWxH (mm)

 

DCS 1200

Voltage: DC 24V

Watts: 12

Max. Flow Rate: 1200 (l/h)

Max Head Height: 1.5 (m)

Package: 205x140x130 LxWxH (mm)

Dimensions

DC650 = 65 x 40 x 60  LxWxH (mm)

DCS1200 = 92 x 56 x 81​ LxWxH (mm)



Jecod 'Professional' Range DCP Pumps

These new pumps improve on the previous DCP pump design as follows:

  • Sine Wave controller technology provides super quiet operation
  • New Digital Controller- Speed Control Settings Between 30%-100% in 1 Watt increments
  • Digital display of power consumption.
  • Suitable for external and internal operation
  • Seals for input and output connections
  • Improved Head Pressure Performance over DCP Models 
  • New Enclosed Impeller Design For a more Quiet Operation
  • Energy Saving up to 65%
  • IC Electronic Detection- Automatic Power Off Protection Upon No Water
  • Wear Resistant Ceramic Shaft

Features

DCP-2500 (23W) 

Maximum flow rate of up to 2,500 litres/hour - adjustable from 750 - 2,500 litre/hour

 

DCP-4000 (33W)

Maximum flow rate of up to 4,000 litres/hour - adjustable from 1,200 - 4,000 litres per hour

 

DCP-6500 (55W)

Maximum flow rate of up to 6,500 litres/hour - adjustable from 1,950 - 6,000 litres per hour

 

DCP-8000 (65W)

Maximum flow rate of up to 8,000 litres/hour - adjustable from 2,400 - 8,000 litres per hour

 

DCP-10000 (80W)

Maximum flow rate of up to 10,000 litres/hour - adjustable from 3,000 - 10,000 litres per hour

 

DCP-13000 (95W)

Maximum flow rate of up to 13,000 litres/hour - adjustable from 3,900 - 13,000 litres per hour

 

DCP-15000 (105W)

Maximum flow rate of up to 15,000 litres/hour - adjustable from 4,500 - 15,000 litres per hour

 

DCP-18000 (145W)

Maximum flow rate of up to 18,000 litres/hour - adjustable from 5,400 - 18,000 litres per hour in

 

DCP-20000 (170W)

Maximum flow rate of up to 20,000 litres/hour - adjustable from 8,000 - 20,000 litres per hour in

 

  • Electronic detection of no water enables automatic power off protection
  • Motor protection if rotor is blocked
  • Can be used in Marine and Freshwater applications
  • No copper elements
  • Long operation life is achieved by the use of wear resistant ceramic shaft
  • Soft start operation - pump gradually builds up to set flow rate
  • Feed mode disables pump for 10 minutes
  • Speed settings (30% - 100%) in 1Watt steps with power consumption indication - setting is retained if power is lost.

Dimensions

DCP-2500 = 103 x 73 x 98  L x W x H (mm)

DCP-4000 = 158 x 80 x 128  L x W x H (mm)

DCP-6500 = 196 x 104 x 163  L x W x H (mm)

DCP-8000 = 196 x 104 x 163  L x W x H (mm)

DCP-10000 = 196 x 104 x 163  L x W x H (mm)

DCP-13000 = 196 x 104 x 163 L x W x H (mm)

DCP-15000 = 223 x 126 x 192  L x W x H (mm)

DCP-18000 = 223 x 126 x 192  L x W x H (mm)

DCP-20000 = 223 x 126 x 192  L x W x H (mm)

Whats Included

  • DCP Pump
  • Sine Wave technology Controller
  • Power adapter with Uk plug
  • Connectors for rigid pipe
  • Hosetail Connectors for flexible tube
  • Inlet filter
  • Instructions​

Flow Chart

Error codes

Er01: Abnormal Working current; Check if the pump voltage is correct or the controller is broken
Er02: Controller overheating; Check whether the controller is exposed to sunshine or in a high temperature environment
Er03: Pump idling; Check if the pump is running dry
Er04: The impeller stops running; Check if the pump  voltage is correct or the controller is broken
Er05: Abnormal Working voltage. Check the input supplying voltage