Bluetooth 5.3 Stereo Wireless Audio Transceiver Emitter Transmitter
Receiver Module Sending Send Receiving Receive Board
Description:
1> This is a set of Bluetooth stereo audio transmission and reception in one of the wireless Bluetooth audio transceiver, using Bluetooth 5.3 protocol version, support memory of the last automatic connection of the Bluetooth device and automatic back connection.
2> The module can be configured to work in Bluetooth audio transmitting mode or Bluetooth audio receiving mode by pressing a button. The transmitting mode or receiving mode is distinguished by two independent LEDS. If you are doing wireless audio transceiver, we recommend that you buy two pieces, one set as transmitter, one set as receiver. Audio signals are transmitted wirelessly between the two machines.
3> When configured in Bluetooth audio transmission mode, you can wirelessly transmit stereo audio signals through Bluetooth with the machine configured in receiving mode, and you can also connect with part of Bluetooth headsets, Bluetooth speakers, wirelessly transmit audio signals to these Bluetooth devices.
Compatibility Notice:
Due to there are many chip schemes for Bluetooth headphones and Bluetooth speakers on the market, there are differences in the underlying software of the chips. This product only guarantees compatibility with the Bluetooth receiving devices sold in our store, and cannot guarantee 100% compatibility with other Bluetooth devices in the market. It cannot connect to car navigation all-in-one devices or devices that require pairing password verification. If there are incompatibilities with other manufacturers' Bluetooth devices (such as inability to connect, no sound after connection, etc.), we cannot solve them and do not provide technical support.
Product Features:
Bluetooth Name: Bluetooth Audio
USB Input Voltage: 4.5-5V
Working Current: 35mA
Transmitting Distance: ≤20 meters
RF Output Power: +5dBm
RF Frequency Range: 2402-2480MHz
Audio Dynamic Range: 80dB
Audio Total Harmonic Distortion+Noise: -70dB
Audio Frequency Response: 20Hz-20KHz
Audio Signal-to-noise Ratio: 95dB
Audio Input/Output Signal Amplitude: ≤2Vpp
Body Size: 66 x 45mm
Weight: about 80g
1> Bluetooth Receiving Status Indicator (Blue Color)
Bluetooth No Connection: Light OFF for 800 mS+ON for 800 mS, cycle flashing
Bluetooth Connected: Light OFF for 3S+Fast flashing 2 times, cycle flashing
2> Bluetooth Transmit Status Indicator (Blue Color)
Bluetooth No Connection: Light OFF for 800 mS+ON for 800 mS, cycle flashing
Bluetooth Connected: Light OFF for 3S+Fast flashing 2 times, cycle flashing
3> 3.5mm Audio Input/Output Interface
When set to transmit mode, it is used to input audio signals from mobile phones, computers, MP3 players, etc.
When set to receive mode, output audio signal to drive the headphones directly or output to the audio power amplifier to drive the speakers.
4> RCA Audio Input/Output Interface
When in transmit mode, it is used to input audio signals from mobile phones, computers, MP3 players, etc.
When in receive mode, output audio signal to the power amplifier to drive the speakers.
5> TYPE-C USB Interface
Power supply to equipment.
6> Power Indicator (Blue Color)
The power indicator light is on when plugged in.
7> Power on / Shutdown Button
Long press 2 seconds to Power on or Shutdown equipment.
8> Pairing/Mode Switching Button
Short Press: Disconnect and pairing again.
Double Click: Switch between transmit mode or receive mode.
9> SMA Antenna Interface
External 2.4G Bluetooth antenna.
Packing List:
1pcs x Wireless Audio Transceiver
1pcs x Type-C USB Wire
1pcs x 3.5mm Male Audio Wire
1pcs x 3.5mm to Lotus Head Audio Cable