4x25mm BONOSS for Mercedes-Benz GLS-Class X167 Wheel Spacer 5x112 CB66.5+15x1.25
When we receive your payment, we will message you to confirm wheel spacer size/ lug/ bolt size with you, please pay attention your ebay message or note the car model and year before payment.
All Orders are Shipped by DHL/ FedEx/ UPS/ TNT within USA/ CA/ Europe.
Estimate arrive in 4-9 days.
Items Description
WHEEL SPACER PARAMETER
Wheel Spacer Quantity
4 Pieces
Torque Specs
M12：113NM or 83.3Ft-tb / M14： 140NM or 103.5Ft-tb
Wheel Bolt Quantity
20 Pieces
Hub Centric
Yes
Wheel Bolt Pattern
5x112MM
Material
Forged Billet 6061-T6 Aluminum
Thickness
25MM / 1 "
Minimum Number of turns for Bolts/Nuts
6.5 Turns
Center Bore
66.5MM
Fit Models
For Volkswagen / For Mercedes-Benz / For Ssang Yong / For BMW / For Porsche / For Audi / For Mini
Thread Pitch
M12x1.5 / M14x1.5 / M14x1.25 / M15x1.25
Color Choice
Black Anodized
Bolt Grade
12.9 Grade
Brand
BONOSS
BONOSS WHEEL SPACERS
1. The listing is For Volkswagen / For Mercedes-Benz / For Ssang Yong / For BMW / For Porsche / For Audi / For Mini wheel spacer, including the required applications(Bolts/Lug Nuts, etc). For a better shopping experience, it is important to measure the fender gap and confirm thickness before purchasing. Our friendly customer service will help you to solve any question.
2. To confirm that this part fits your vehicle, please attached your car, make, and year.
3. If the thickness of the wheel spacer is smaller than the length of the original studs, the rims used must allow for small hockets in the mounting surface of the rim. If using rims without enough hockets, the stock studs should be shortened so that they do not extend beyond the thickness of the spacer.
Items Features
How to Install BONOSS Wheel Spacers
1. Remove wheel bolts and wheel.
2. Place BONOSS Spacer on axle of vehicle (where the wheel was attached) making sure that the spacer is fully seated and flush with the hub.
3. Fasten BONOSS spacer to car using attached special bolts. Carefully hand turn bolts making sure that they spin in easily so as to not cross-thread. Repeat with the rest of bolts.
4. With hand wrench, snug up the bolts in a star.
5. Tighten the wheel bolts in a star pattern using torque wrench set to factory specification.
6. Ensure no bolt heads come out spacer.
7. Place the wheel onto the spacer and carefully form up the wheel / spacer bolt holes and mounting hole.
8. Carefully hand turn wheel bolts and make sure that they spin in easily so as to not cross-thread.
9. Repeat step 8 with the rest of bolts.
10. With hand wrench, snug up the bolts in a star pattern.
11. Before fully tightening, turn the wheel and tire to check whether there have any noise or interference.
12. Use a torque wrench specified by the manufacturer to snug up the lug nuts in a star pattern.
Some Tips / FAQ for BONOSS Wheel Spacer
1. What is the size of the wheel spacers? The listing specifications for wheel spacers: Bolt Pattern (PCD): 5×112, Center Bore (CB): 66.5, Thread: M12x1.5 / M14x1.5 / M14x1.25 / M15x1.25
2. Are BONOSS Wheel Spacer Safe？ We use forged AL6061-T6 material (tensile strength ≥310Mpa), modern CNC machining by 0.02mm tolerance. BONOSS forged Light weight Plus wheel spacers are safer, higher performance, and more professional in design than otehrs.
3. Will BONOSS Wheel Spacers Cause Vibration? Compared with ordinary hub centric wheel spacers, BONOSS uses the multi-stage hub centric design and precision 0.02mm CNC machining, which effectively guarantees the safety and reliability of the wheel spacers’ quality and provides higher stability. The multi-stage hub-centric can make the spacers more closely fitted to the wheel hub, greatly reduce the vibration of high-speed caused by the inaccurate hub centric.
4. How to Wheel Spacers Check thickness do I Need? Use a straight edge such as a metal ruler, place the straight edge on the outermost part of the rims where the wheel comes closest to the fender (preferably the top), then, measure from the outside wheel to the straight edge. This distance is the size spacer you will need to achieve the look that flushes or nearly flushes with the fender line.
5. What’s the performance of the BONOSS forged grade 12.9 extended wheel bolts on wheel spacers?
BONOSS forged grade 12.9 extended wheel bolts are made by the forging process which brings excellent mechanical and physical properties. It achieved ISO standard grade 12.9, tensile strength≥1,282Mpa, ultimate tensile load≥152,000N, hardness (HV)≥395, NSS≥500H, two million times limited life range test without damage. It is strong enough to use in daily driving, off-road, and other scenes.
6. How does the active cooling function works on my car?
As a professional wheel spacers design and manufacturer, BONOSS created the Global Pioneer Active Cooling Technique, breaking the single functionality of the traditional wheel spacers. The special petal shape grooves utilize the rotation of the spacers to allow the external cold air to enter and continuously flowing inside the spacers, enhancing the heat dissipation of the braking system. The symmetrical design allows for multiple grooves to work at the same time, no matter it is on the left or right wheel, whether driving forward or reversing, the purpose of heat dissipation can be normally and effectively achieved. Install BONOSS active cooling wheel spacers helps improve the heat dissipation of the brake system, reducing brake fade while providing the functions of traditional wheel spacers.
7. IMPORTANT NOTES
---Installation should only be performed by a trained professional.
---Vehicle fitment compatibility is only a guide; please ensure that these are the correct ones for your vehicle.
---Please take the necessary measurements to ensure proper fitment. We only guarantee that you will receive the spacers that are described; we do not guarantee any fitment onto any vehicle.
---Please insure that the bolt patterns and thread patterns of your vehicle match the specifications above. That will insure a smooth installation.
---If the studs are longer than the Adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your existing lugs if you choose not to purchase shorter studs.
---If you have any questions regarding how to properly measure your bolt pattern, please contact us via eBay, and we can give you detailed instructions.
Please don’t hesitate to contact us for more details if needed.
--Buyer need to pay for custom duty or import tax if needed. --All Orders that Payment is received before 5pm Beijing Time M-F will be shipped the same day, if received after that time, they will be shipped the next business day, Saturday and Sunday orders will be processed and Shipped on Monday. --All orders are shipped by DHL/FedEx/UPS within the continental United States. Other international Shipping is available. You need to contact us confirming express method and accounting shipping costs. --Your purchase will be shipped via standard airmail, which normally takes 3-10 working days to arrive. --We will provide you with tracking numbers when the item is shipped out. We only accept paypal. (Accept credit card payment through PayPal) Payment must be received within 5 days after auctions ended. If you do not have Paypal account, please register it first, thank you. 30 days money back, shipping fee is borned by buyer. BONOSS have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1" inch etc.), customized wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 4 lug to 5 lug; 5 lug to 6 lug;6 lug to 8 lug... Would never consider to use the casting aluminum alloy and bad quality bolt/stud, lug nut to produce BONOSS Wheel spacers. ONLY using the forged 6061-T6 or 7075-T6 aluminum alloy and high quality bolt/stud,lug nut(passed the 1 Million times Fatigue Test,etc.). Here are our Four concept respectively: 1. Insistence on the service philosophy that safty is No.1 and creating the value for our customers. 2. Insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability. 3. Insistence on the test from the third party. 4. Insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers). Always online in eBay, if you want to consult our wheel spacers or other products, feel free to send message for me, I will reply as soon as possible.
