Laser Diode Brass Module 2.2-2.4V 5mW Red 650nm Tin-Pin 5.6mm T018
for PLC Raspberry Pi Development Kits Open Source Hardware Electronics DIY
Features:
1. Working wavelength: 650nm
2. Output power: 5mW
3. Working current: <40mA
4. Working voltage: 2.2~2.4V (absolutely cannot be powered directly)
5. Package: T018 (φ5.6mm)
6. Working life: >5000 hours
Precautions
1. The laser tube needs the operating current of the controller within the safe range, and cannot be directly supplied with voltage.
2. The laser tube should be installed in the module case to have good heat dissipation to work for a long time, and the static direct full power works for a long time.
2. Output power: 5mW
3. Working current: <40mA
4. Working voltage: 2.2~2.4V (absolutely cannot be powered directly)
5. Package: T018 (φ5.6mm)
6. Working life: >5000 hours
Precautions
1. The laser tube needs the operating current of the controller within the safe range, and cannot be directly supplied with voltage.
2. The laser tube should be installed in the module case to have good heat dissipation to work for a long time, and the static direct full power works for a long time.
●*The picture is for reference only!
Package included: (According to your choice)
