Item Description
- Nail in Anchors are a removable light duty anchor, with a variety of head styles, designed for use in a variety of substrates such as concrete, stone, solid brick, solid block, hollow brick, hollow block and hollow slab.
- Features / Benefits: Quick and easy to install and remove, can be hammered all the way into the hole with pre-expansion. The drive screw's saw tooth thread make it easy to drive and unscrew. The nylon body provides insulation between drive screw and work surface
- Material / Coating: The anchor body is nylon and the pin you hammer in is made from low mild steel and coated zinc plated. Designed to be used internally, can be used externally but the pin will rust
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you do see a problem please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- PDF data sheet: The attached PDF data sheet has additional technical specifications and "how to" diagrams which we find to be helpful as reference material. Although provided by one of our suppliers, the brand supplied may be different. If brand is critical, please refer to the technical specification tab to see our supplier list or contact us prior to ordering. As we are always updating and adding new lines to our site the data sheet may not include every item we stock or have items that are currently not on our site. If there is something you need and you can’t find it, please contact us for price and availability
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Fastener Kits Online is not responsible for any loss, claim or damages arising therefrom. In developing this information, Fastener Kits Online has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
- Nail in Anchors are a removable light duty anchor, with a variety of head styles, designed for use in a variety of substrates such as concrete, stone, solid brick, solid block, hollow brick, hollow block and hollow slab.
- Features / Benefits: Quick and easy to install and remove, can be hammered all the way into the hole with pre-expansion. The drive screw's saw tooth thread make it easy to drive and unscrew. The nylon body provides insulation between drive screw and work surface
- Material / Coating: The anchor body is nylon and the pin you hammer in is made from low mild steel and coated zinc plated. Designed to be used internally, can be used externally but the pin will rust
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you do see a problem please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- PDF data sheet: The attached PDF data sheet has additional technical specifications and "how to" diagrams which we find to be helpful as reference material. Although provided by one of our suppliers, the brand supplied may be different. If brand is critical, please refer to the technical specification tab to see our supplier list or contact us prior to ordering. As we are always updating and adding new lines to our site the data sheet may not include every item we stock or have items that are currently not on our site. If there is something you need and you can’t find it, please contact us for price and availability
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Fastener Kits Online is not responsible for any loss, claim or damages arising therefrom. In developing this information, Fastener Kits Online has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| Specification | |
| Type | Nylon Nail-In Anchor |
| Size | M6.5 (6.5mm) |
| Closest Size in Imperial | 1/4" |
| Head Style | Mushroom Head |
| Length | 75mm |
| Pin Diameter P | 3mm |
| Max Fast Thickness G | 50mm |
| Drill Hole Size | 6.5mm |
| Suspension Body H | 35mm |
| Body Type | Nylon Body / Steel Pin |
| Drive Type | Hammer |
| Standard | AS1789 |
| Material | Nylon Body with Steel Pin |
| Class Grade | Low Tensile Grade 2 |
| Finish | Zinc Plated Pin |
| Corrosion Protection Level | Moderate |
| Material Finish | Nylon |
| Brand | Hobson Engineering |
| Alternative Brands | Bremick Fasteners |
| MPN | MNMNM0650075, MNM105, ANMMZ060752, NNM65075, 05M675 |
| UPC | 9314818502238, 9337357118203, 9347176002942, 9312862166758 |
| Delivery | Free Shipping |
