Unique design by Redsretros, ideal solution to save the cost of stolen equipment.

All our products are made with:

3M diamond grade DG3 4000 with initial coefficient retro reflective property of 570 cd/lux/m2

5 Magnetic Surveying Targets, perfect for use with any Total Station, 25mm precision made, with multiple applications. Compact and easily stored in your instrument box.

• Ideal on Network rail sites, where control point establishment is difficult or in possible, but you want establish fixed control.
• Feedback from last buyer:Used these to traverse over ply fencing brilliant saved hrs. see feedback for yourself.
• If you want to install permanent points in the ground or walls or even wooden fence post, these targets are site tested by myself and are an essential tool in my jacket pocket
• One tripod, total station and nails should be all you need, rather than a full traverse kit on site.
• Using these targets will also reduce your height errors as the 12.5mm constant will remove human errors or even sight at 0mm for even better accuracy.
• Double sided design to reduce the need for rotating targets, unlike standard targets.
• They can be attached to any ferrous metal surface in a large variety of ways for measuring with all total station instruments, with a 12.5 mm height offset and a precise 1mm forward offset.
• These innovatively designed targets can be attached to Hilti nails, PK nails, steel pins, steel bolts, steel columns.
• They can be mounted vertically, horizontally and even upside down.
• They can be used to traverse with, instead of leaving your expensive traverse kit on foresight/backsight control point.
• Ideal for radiating shots. so reducing the need to move your tripods around.
• They have been designed and produced, drawing on 25 years of surveying experience.
• Using these reusable targets will reduce the cost of using the self adhesive retros, giving a saving of about 25p per use.
• They have a unique contrasting design, which makes precise sighting and measuring significantly easier.
• They are made from the highest quality 3M diamond grade film, which increases the measuring distance to 200m+ in HDS or Reflective Tape mode.
• They are ideal for monitoring points from a baseline, as they can be measured from 2 different positions without needing to move them, as they are double sided.
• They can make resection trouble free, as nails can be established all around, in pegs, wooden posts, walls etc and the multiple targets will give reusable mm accuracy.
• They come as a pack of 5 double sided Red and white.
• postage and packing is included, 1st class recorded Royal Mail
• Multiple sets available, contact us using secure ebay messaging to discuss further.
• Once used, they will be invaluable, I personally use them every day
• If your worried about you traverse kit being stolen, these are an ideal solution