• 【Type】: Link Rod End Ball Joint
• 【Material】: Metal
  
• 【Second type】: Flange type
  Flange type ball joint, commonly known as a ball joint with a gasket, differs from a standard ball joint in that one side of the inner copper bead of the ball joint is higher than the height of a pad. It is commonly used as a pull rod joint for aircraft models, climbing vehicles, simulation vehicles, drift vehicles, and remote control model ships.
  Φ 2 × H6 × L19mm × M2 (pull rod hole)
  M2 ball head buckle bottom hole size: 2mm suitable for M2 pull rods, steel wires, rolling metal ball hole diameter: 2.0mm
  Φ 2.5 × H6 × L24mm × M2.5 (pull rod hole)
  M2 ball head buckle bottom hole size: 2.5mm suitable for M2.5 pull rods, steel wires, rolling metal ball hole diameter: 2.5mm
  Φ 3 × H7 × L29mm × M3 (pull rod hole)
  M3 ball head buckle bottom hole size: 3mm suitable for M3 pull rods, steel wires, rolling metal ball hole diameter: 3.0mm
  
• 【The third type】:  Short, Round type / Flange type
  Φ 3 × H6 × L15mm × M3 (pull rod hole)
  M3 ball head buckle bottom hole size: 3mm, length: 15mm, rolling metal ball hole diameter: 3.0mm
  Φ 3 × H6 × L20mm × M3 (pull rod hole)
  M3 ball head buckle bottom hole size: 3mm, length: 20mm, rolling metal ball hole diameter: 3.0mm
  

• 【Note】】: 1.The product dimensions are all measured by hand, and there are tolerances in the dimensions. 2. Due to different photographic products, the actual color may have color difference, which is subject to the actual object.

Packing Quantity】:

• According to your choice.