Grit: 600# (fine sand)
Material: Diamond
Shape: E needle (press top shape, flat grinding wheel)
Specifications: 1/1.5/2/2.5/3/4mm
It is suitable for fine carving and grinding of jade, and the effect is excellent. After polishing, the jade carving workpiece is exquisite and delicate. Regardless of machine polishing and manual polishing, it saves a lot of manpower and time, and the processing accuracy and efficiency are much higher than traditional crafts: oil stone polishing or sand glue polishing. It is a major innovation in the polishing process.
Suitable for jade, emerald, amber, abrasive tools and other common grinding heads for grinding and engraving, peeling, grinding and polishing, used for trimming curved surfaces and detail correction and polishing
Scope of use: electric grinder/engraving pen/hanging grinder/gas grinder/dental machine and other tools
Shock machine polishing process: After the carving is completed, repair it with 600# tools, and it needs to be over 30,000 rpm at high speed. The 1200# tool repairs the bottom of the detail groove, and the low speed is 2000-3000 thousand revolutions. 100-rpm hand-held dental machine for flat bottom polishing. It is better to use a backing machine with a flat bottom, and it is sold in the store. Shock machine 600# sand grinding for 48 hours, 3000# grinding for 72 hours, cold light powder for 12 hours. Use 600# sand at the beginning to ensure that the details will not be damaged.
Tips for light repairing work: the carving should be clean, not too rough, use light force, go back and forth two or three times, cool down with wet water, rotate at 2,000 to 3,000,
The 600# grinding needle also has the function of carving and polishing. It is used for fine carving and polishing of jade carving works. The effect is excellent. There is no need to use time-consuming tools such as oilstone and mortar. No damage to engraved details after polishing by vibration machine
The electroplating quality of the tool is excellent. After a long time of use, there is no diamond sand on the front end to affect the work. You can smooth the part where the iron tire is seen and continue to use it.
Tips: When using diamond tools, please pay attention to the following:
1. When you install a new tool, be sure to test whether the tool jumps. If it jumps, you can't work directly. You have to adjust it so that it doesn't jump before you can use it. Otherwise, the tools will wear out quickly, and the carved things will not be very smooth. Adjustment method: Use a small wrench for changing the chuck to lightly tap the high-speed rotating tool handle until the tool is stable. It is strictly forbidden to knock on the electronic machine. The adjustment method is to loosen the chuck, turn the tool at an angle or extend and retract a little.
2. It must be cooled with water (similar to dripping devices like hospital drips), such as dry drills, the diamond on the tool head will be graphitized due to overheating, and will be quickly worn out and scrapped.
3. When drilling, try to avoid shaking, because shaking will cause local damage to the tool and accelerate the damage of the entire tool.
4. The speed should be as high as possible. Generally, the line speed is not lower than 10-20 meters per second.
5. Feed with light pressure. Diamond tools rely on grinding to process workpieces. If excessive force is used, the grinding powder is not easy to remove, and the tools (especially small tools) are easily damaged.
Package Included:
According to your choice.
Payment:
*Paypal only
Delivery details:
*We only accept your Ebay Address,Please Make sure it's 100% right.
*The items you ordered will be shipped out in 2 business day by Air Mail when your payment is clear.
Terms of sales:
*If you are not satisfied with the item, please contact with us.
*We will offer Full Refund to you when we receive your returned item.
*Any problem, please feel free to contact with us.
About us:
*If you are satisfied with the products,I expect you can leave us a positive feedback.
*If you have any problem or be not satisfied with them,please feel free to contact us,we will reply you within 24 hours.
Contact us:
*We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 business hours for us to response.
*About item:For the functional products in our shop, we make sure that the functions are the same as description, but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance. Please be advised before you bid.
