and then logged.

See pictures for an example of what you will receive.

ONE (1)

 O.E.M. Original Equipment Manufacturer Factory

remote keyless entry fob alarm controller

Transmitter control clicker keyfob controller replacement  

 

FCC ID #: 9442982

Buttons: 2: Lock/ Panic, Unlock

Frequency: 315 Mhz

Battery: 1; CR1220 (installed)

See Item Specifications for more details

 Compatible Vehicle’s

MAKE, YEAR, MODEL

PART NOTES

Volvo 1996 850 2.3L Turbo (B5234FT) Sedan

from VIN# T1290074 on FC1

from VIN# T2288792 on FC2

Volvo 1996 850 2.3L Turbo (B5234FT) Wagon

from chassis # 197208 on

Volvo 1996 850 2.3L Turbo R (B5234T5) Sedan

from VIN# T1290074 on FC1

from VIN# T2288792 on FC2

Volvo 1996 850 2.3L Turbo R (B5234T5) Wagon

from chassis # 197208 on

Volvo 1996 850 2.5L non-turbo (B5254FS) Sedan

from VIN# T1290074 on FC1

from VIN# T2288792 on FC2

Volvo 1996 850 2.5L non-turbo (B5254FS) Wagon

from chassis # 197208 on

Volvo 1996 960 2.9L 6 cyl. Sedan

from chassis # 85160 on

Volvo 1996 960 2.9L 6 cyl. Wagon

from chassis # 31388 on

Volvo 1997 850 2.3L Turbo (B5234FT) Sedan

Volvo 1997 850 2.3L Turbo (B5234FT) Wagon

Volvo 1997 850 2.3L Turbo R (B5234T5) Sedan

Volvo 1997 850 2.3L Turbo R (B5234T5) Wagon

Volvo 1997 850 2.5L LPT (B5254T) Sedan

Volvo 1997 850 2.5L LPT (B5254T) Wagon

Volvo 1997 850 2.5L non-turbo (B5254FS) Sedan

Volvo 1997 850 2.5L non-turbo (B5254FS) Wagon

Volvo 1997 960 2.9L 6 cyl. Sedan

Volvo 1997 960 2.9L 6 cyl. Wagon

Volvo 1997 S90

Volvo 1997 V90

Volvo 1998 S90

Volvo 1998 V90

 

PROGRAMMING INSTRUCTIONS:

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

This remote needs to be programmed to your vehicle in order for it to work with your vehicle’s installed RKE (remote keyless entry ) system:

In the 1995 and 1996 Volvo 850 it’s possible to program new remote control fobs into the car.

Before you start be sure that your car is a 95 or 96 850 with the alarm led in the center of the dash near the windscreen and that the remote that you are going to program looks like the one pictured on the right.

Also make sure that your fob have good batteries in it.

To program the fob into the car you should, with all doors and hood closed, do as follows:

Step 1. During a max of 10 seconds period, Turn the igniton on and off 5 times in a row.

Step 2. In the fifth time leave the ignition on. If you wait a couple of seconds and look at the alarm led it should be flashing. If not, start from the beginning (step 1).

Step 3. With the led flashing, push a button on the remote until the flashing slows. This means that the signal from the fob was receiveed and programed into the car.

Repeat the step 3 for each of the remotes.

Step 4. When the flashing led stops, turn the ignition off and temove the key.

You may now check if your remote(s) is working.

1.   Some years require diagnostic programming according to how the manufacturer set the system

a.   Free programming Requirements per manufacturer upon request

   b.  Contact  us via  eBay messages (Keyless4u store) Prior to Purchase  

with  your vehicle’s ….

1.  Make

2.  Model

3.  Year

2.  We will respond via eBay messages with the manufacturer’s programming requirements so that you can determine if you are capable of programming your vehicle or if you will need to visit a local dealer or locksmith for programming with a diagnostic scan tool – we do not write the programming – we pass it on to you as a courtesy.