Description:
1. Uses CH340G instead of CP2102.
2. NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for 3. superior stability on all supported platforms.
4. Communication interface voltage: 3.3V.
5. Antenna type: Built-in PCB antenna is available.
6. Wireless 802.11 b/g/n standard
7. WiFi at 2.4GHz, support WPA / WPA2 security mode
8. Support STA/AP/STA + AP three operating modes
9. Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
10. D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
11. AD0: 1 channel ADC
12. Power input: 4.5V ~ 9V (10VMAX), USB-powered
13. Current: continuous transmission: ≈70mA (200mA MAX), Standby: <200uA
14. Transfer rate: 110-460800bps
15. Support UART / GPIO data communication interface
16. Remote firmware upgrade (OTA)
17. Support Smart Link Smart Networking
18. Working temperature: -40 ℃ ~ + 125 ℃
19. Drive Type: Dual high-power H-bridge driver
20. ESP8266 has IO Pin
21. Don't need to download resetting
22. A great set of tools to develop ESP8266
23. Flash size: 4MByte
1. Uses CH340G instead of CP2102.
2. NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for 3. superior stability on all supported platforms.
4. Communication interface voltage: 3.3V.
5. Antenna type: Built-in PCB antenna is available.
6. Wireless 802.11 b/g/n standard
7. WiFi at 2.4GHz, support WPA / WPA2 security mode
8. Support STA/AP/STA + AP three operating modes
9. Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
10. D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
11. AD0: 1 channel ADC
12. Power input: 4.5V ~ 9V (10VMAX), USB-powered
13. Current: continuous transmission: ≈70mA (200mA MAX), Standby: <200uA
14. Transfer rate: 110-460800bps
15. Support UART / GPIO data communication interface
16. Remote firmware upgrade (OTA)
17. Support Smart Link Smart Networking
18. Working temperature: -40 ℃ ~ + 125 ℃
19. Drive Type: Dual high-power H-bridge driver
20. ESP8266 has IO Pin
21. Don't need to download resetting
22. A great set of tools to develop ESP8266
23. Flash size: 4MByte
Package Include:
1 x Lua Nodemcu ESP-12F WIFI Network Development Board Module Precise Based ESP8266
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Fill your shipping info
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.