The KPM linear transducer with Rod Ends Joints is used to measure and track the linear motion or position of a target. The potentiometer position sensor is carried out with a high-resolution conductive plastic resistive element. The displacement encoder has a very long lifetime and high accuracy due to its good linearity.
The compact linear transducers are designed for applications with harsh environmental conditions. The transducer with ball joints compensates movements transversely to the push rod, so that non-linear movements can also be coupled simply and without stress. The mechanical detection of linear movement is done by a front guided push rod.
KPM Series |
150 |
200 |
225 |
250 |
275 |
300 |
Unit |
Strokes |
150 |
200 |
225 |
250 |
275 |
300 |
mm |
Electrical Stroke |
151 |
201.5 |
226.5 |
252 |
277 |
302 |
mm |
Resistance ±5% |
5 |
KΩ |
|||||
Linearity |
0.08 |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
± % |
Mechanical Stroke |
156 |
206.5 |
231.5 |
257 |
282.5 |
307 |
±2mm |
Length (A) |
205 |
252 |
277 |
302 |
327 |
352 |
±2mm |
Resolution |
infinite |
|
|||||
Repeatability |
0.01 |
mm |
|||||
Working speed |
≤5 |
m/s |
|||||
Protection class |
IP65 DIN405000/IEC529 |
|
|||||
Lifetime |
> 20 x 106 |
cycles |
|||||
Vibration |
5~2000, Amax=0.75, amax=20 |
Hz/mm/g |
|||||
Working current |
≤1 |
uA |
|||||
Max Current |
10 |
mA |
|||||
Max Voltage |
42 |
V |
|||||
Input Voltage & Output Voltage Temperature Rate |
5 (Typical) |
ppm/K |
|||||
Insulation Resistance |
≥10 @ 500V, 1bar, 2s |
MΩ |
|||||
Insulation Intension |
≤100 @ 500VDC,50Hz, 2s,1bar |
uA |
|||||
Temperature Range |
-40 ~ 120 |
℃ |