Silicone Sealing Compound, Transparent by LIQUI MOLY - 200ml 6184

PRODUCT DESCRIPTION Heat-resistant, single-component sealant. Vulcanizes under the influence of air humidity and cures to form a permanently elastic mass. For sealing a wide variety of materials (e.g. metal, plastic, glass, porcelain, painted wood surfaces, etc.) in engines, transmissions, vehicles, containers, plants and heating facilities as well as air conditioning systems. High-quality and easy-to-use silicone-based sealing compound. The automatic cartridge removes the need for a cartridge gun when processing. With outstanding resistance to cold, heat and aging. Stays permanently elastic and is resistant to chemicals, oils, etc. Can withstand temperatures from -40 °C to 150 °C, short periods up to 250 °C. PRODUCT DETAIL For sealing oil and transmission pans, engine housings, differentials, valve covers, water pumps, spur gear covers, headlamps, taillamps, battery boxes, etc. For metal parts, plastic and glass. PROPERTIES- adheres well to vertical surfaces - resistant to stresses and vibrations - outstanding thermal stability - free of solvents, formaldehyde, CFCs, PCB, PCP - permanently elastic - enables a multifaceted range of applications - outstanding chemical resistanceTECHNICAL DATAOperating temperature range -40 to +150, temporary up to +250 °C Penetration after 5 seconds 185 +/- 30 1/10 mm DIN 51579 Color / appearance transparent Skin formation time at 23 °C/50 % relative humidity ca. 10 min Curing rate at 23 °C / 50 % rh ca. 2 mm/24h Processing temperature +5 to +35 °C Base Silicone with oxime basis Hardness, Shore A 17 ± 5 DIN 53505 Tensile stress at 100 % elongation ~ 0,60 N/mm² DIN 52455 pH value 7 Viscosity at 40 °C > 7 mm²/s Form pastelike, liquid Odor characteristic Shelf life in original sealed container 18 Monate Recommended storage temperature +2 - +15 °CAREAS OF APPLICATION For sealing oil and transmission pans, engine housings, differentials, valve covers, water pumps, spur gear covers, headlamps, taillamps, battery boxes, etc. For metal parts, plastic and glass. APPLICATION The surfaces to be sealed must be clean, dry and free of oil and grease. Remove cap and turn cartridge tip by 90°. Apply material evenly and join parts immediately without flash-off time. Note: Insufficient adhesion can be expected on substrates such as PP, PE, Teflon and bitumen. That is why we recommend carrying out an adhesion test before use.

Silicone Sealing Compound, Transparent by LIQUI MOLY - 200ml 6184

PRODUCT DESCRIPTION

Heat-resistant, single-component sealant. Vulcanizes under the influence of air humidity and cures to form a permanently elastic mass. For sealing a wide variety of materials (e.g. metal, plastic, glass, porcelain, painted wood surfaces, etc.) in engines, transmissions, vehicles, containers, plants and heating facilities as well as air conditioning systems.

High-quality and easy-to-use silicone-based sealing compound. The automatic cartridge removes the need for a cartridge gun when processing. With outstanding resistance to cold, heat and aging. Stays permanently elastic and is resistant to chemicals, oils, etc. Can withstand temperatures from -40 °C to 150 °C, short periods up to 250 °C.

PRODUCT DETAIL

For sealing oil and transmission pans, engine housings, differentials, valve covers, water pumps, spur gear covers, headlamps, taillamps, battery boxes, etc. For metal parts, plastic and glass.

PROPERTIES

- adheres well to vertical surfaces - resistant to stresses and vibrations - outstanding thermal stability - free of solvents, formaldehyde, CFCs, PCB, PCP - permanently elastic - enables a multifaceted range of applications - outstanding chemical resistance

TECHNICAL DATA

Operating temperature range -40 to +150, temporary up to +250 °C Penetration after 5 seconds 185 +/- 30 1/10 mm DIN 51579 Color / appearance transparent Skin formation time at 23 °C/50 % relative humidity ca. 10 min Curing rate at 23 °C / 50 % rh ca. 2 mm/24h Processing temperature +5 to +35 °C Base Silicone with oxime basis Hardness, Shore A 17 ± 5 DIN 53505 Tensile stress at 100 % elongation ~ 0,60 N/mm² DIN 52455 pH value 7 Viscosity at 40 °C > 7 mm²/s Form pastelike, liquid Odor characteristic Shelf life in original sealed container 18 Monate Recommended storage temperature +2 - +15 °C

AREAS OF APPLICATION

For sealing oil and transmission pans, engine housings, differentials, valve covers, water pumps, spur gear covers, headlamps, taillamps, battery boxes, etc. For metal parts, plastic and glass.

APPLICATION

The surfaces to be sealed must be clean, dry and free of oil and grease. Remove cap and turn cartridge tip by 90°. Apply material evenly and join parts immediately without flash-off time. Note: Insufficient adhesion can be expected on substrates such as PP, PE, Teflon and bitumen. That is why we recommend carrying out an adhesion test before use.