Spray Dryer is mainly suitable for the laboratory for changing liquid material directly into micro powder, without filtration, concentration, and smash before drying, the supplies for all solutions is a broad applicability, such as emulsion, suspending liquid.
Features
● Original nozzle (dual-fluid nozzle) for high efficiency.
● LCD touch screen parameter display: inlet temperature / outlet temperature / peristaltic pump speed / air volume / through the needle frequency.
● Automatic control: one-key start, set the spray process parameters, the temperature reaches a predetermined temperature, the peristaltic pump starts by itself, the touch screen display running animation, the running process is clearly displayed; shutdown by simply pressing the stop button, the machine automatically shut down safely.
● Manual control: If you need to adjust the process parameters in the experimental process, it can be easily switched to the manual state, the entire experimental process color touch screen dynamic display (animation)
● Equipped with nozzle cleaner (through the needle), when the nozzle is blocked, it will be automatically cleared, the frequency of through the needle can be automatically adjusted.
● Shutdown protection function: when shutting down the machine, you only need to press the stop button, the machine will stop running immediately except for the fan, which ensures that the equipment will not be burned out due to misuse (forcibly shutting down the fan) of the heating part.
● The whole system is made of stainless steel, so that the drying process is carried out in a pollution-free environment.
● Built-in oil-free air compressor, the particle size of the spray powder is normally distributed, with very good fluidity and very low noise, less than 60db.
The atomization structure of two-fluid spray, the whole machine is made of high quality stainless steel, compact design, no need for ancillary equipment.
● The design of drying temperature control adopts real-time regulation PID constant temperature control technology, so that the temperature control of the whole temperature zone is accurate, and the precision of heating temperature control is ±1℃.
● In order to maintain the purity of the sample, it is equipped with air inlet filter.
● The feeding volume can be adjusted by feeding peristaltic pump, and the minimum sample volume can be up to 50ml.
● After drying, the finished dry powder has a more uniform granularity.
● For viscous materials, a nozzle cleaner (through-needle) is provided, which will automatically clear the nozzle when it is blocked, and the frequency of the through-needle can be automatically adjusted.