Item Description
- Hex Flange Bolts feature a flange under the head which eliminates the need for a separate washer. The built-in washer acts to distribute the clamping load over a greater area and the wide flange head is designed to provide the same holding power as a washer. Can be used to fasten objects together by inserting the bolt from the one end and securing it with either a nut on the other end or into a taped hole.
- Material / Coating: Black or Plain finish is unfinished (bare steel) has no actual protective coating. There may be an oil residue which provides some shelf life but no real corrosion protection when in use. The term “black” is an old industry term for plain. Depending on the material grade and heat treatment process the colour can vary from a shiny oily finish to a dull black
- Material Strength: These bolts are made to class 10.9 and are commonly used in automotive and agricultural equipment. 10.9 bolts have a yield strength of 940 and the tensile strength is 1040 Mpa compared to 8.8 yield strength of 640 and the tensile strength is 800Mpa
- Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Differences may exist between batches such as actual fastener measurements, head markings, appearance or actual finish
- Head Style: We have found the top of the head on this style of Flange bolt can either be flat or have a small indent. If you are matching an existing bolt and appearance is important please contact us prior to placing your order and we can check the size and advise.
- Photos: Are of the product but may not be the actual diameter, height, width, length, head style you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Fastener Kits Online is not responsible for any loss, claim or damages arising therefrom. In developing this information, Fastener Kits Online has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
- Hex Flange Bolts feature a flange under the head which eliminates the need for a separate washer. The built-in washer acts to distribute the clamping load over a greater area and the wide flange head is designed to provide the same holding power as a washer. Can be used to fasten objects together by inserting the bolt from the one end and securing it with either a nut on the other end or into a taped hole.
- Material / Coating: Black or Plain finish is unfinished (bare steel) has no actual protective coating. There may be an oil residue which provides some shelf life but no real corrosion protection when in use. The term “black” is an old industry term for plain. Depending on the material grade and heat treatment process the colour can vary from a shiny oily finish to a dull black
- Material Strength: These bolts are made to class 10.9 and are commonly used in automotive and agricultural equipment. 10.9 bolts have a yield strength of 940 and the tensile strength is 1040 Mpa compared to 8.8 yield strength of 640 and the tensile strength is 800Mpa
- Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Differences may exist between batches such as actual fastener measurements, head markings, appearance or actual finish
- Head Style: We have found the top of the head on this style of Flange bolt can either be flat or have a small indent. If you are matching an existing bolt and appearance is important please contact us prior to placing your order and we can check the size and advise.
- Photos: Are of the product but may not be the actual diameter, height, width, length, head style you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Fastener Kits Online is not responsible for any loss, claim or damages arising therefrom. In developing this information, Fastener Kits Online has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| Specification | |
| Type | Bolt Only |
| Head Style | Hex Flange Head |
| Serrations Under Head | No |
| Diameter Size | 10mm | M10 |
| Size x Pitch | M10 x 1.50p Coarse |
| Bolt Size | M10 (10mm) |
| Thread Size | 1.50mm |
| Thread Type | Metric - Coarse |
| System of Measurement | Metric |
| Thread Direction | Right Hand |
| Item Length | 40mm |
| Closest Size in Imperial | 3/8" |
| Part Or Full Thread | Full Thread (FT) |
| Product Diameter D | 9.78 - 10.00mm |
| Across Flats Af | 14.73 - 15.00mm |
| Spanner Size | 15mm |
| Across Corners Ac | 16.50mm |
| Head Height H | 9.20mm |
| Flange Diameter F | 21.70- 22.30mm |
| Drive Type | Hex |
| Material | Carbon Steel |
| Grade | High Tensile Class 10.9 |
| Finish | Plain Black |
| Corrosion Protection Level | Poor |
| Standard | DIN 6921 / CL10.9 |
| Brand | Hobson Engineering |
| MPN | BF10PCM100040 |
| UPC | 9314818429719 |
| Number in Pack | 10 |
| Shipping | Free Delivery |
