Blaze King (150-0175-C) Wood Stove Convection Axial Spider Fan | Aftermarket

Aftermarket axial spider mount fan for The Blaze King Princess PI29 Wood Insert. This fan is designed to circulate room air around the back and top of the insert.  As this room air travels around the unit it becomes heated.  This increases the efficiency of the stove by allowing more heat to be transferred into the room and less heat to be lost through the exhaust.

Blaze King Models:

• Ashford 20.1
• Ashford AF20.2
• Ashford AF30
• Ashford AF30.1
• Chinook 20
• Chinook 20.1
• Chinook 30
• Chinook 20.2
• Chinook CK24C
• Chinook CK24F
• Chinook CK30.1
• Chinook CK30.2
• Chinook CK30C
• Chinook CK30F
• King Catalytic KE-1107 (Ver 1.14)
• King KE40
• Princess PE1006
• Princess PI29
• Princess PE32
• Sirocco 20
• Sirocco SC30
• Sirocco SC30.1
• Sirocco SC30.2

Blaze King 150-0175-C Fan Installation Instructions:

1. Unplug the unit's power cord.
2. Locate the fan motors by following the instructions outlined in the fan kit installation instructions  See link above. Free-Standing Stoves: It may be necessary to remove the rear and side panels to gain access to this area. Inserts: Most often the unit needs to be pulled out of the firebox in order to access this location.
3. Follow the power wires coming off of the existing motor & disconnect them at the first connection (Pay attention to the orientation of the wires and connection location. Often the power wire leads will come from the motor. Other times, there will be two lead wires that run from the unit and connect to tabs on the motor).
4. Locate the 4 fasteners attaching the axial fan housing to the unit and remove them.
5. Position the new fan in place and reattach using the previously removed fasteners.
6. Reconnect the wires (Pay attention to the wire location).
7. Free-Standing Stoves: Reinstall any previously removed panels. Inserts: Reposition the insert back into the firebox cavity.
8. Plug in the unit's power cord.

Product Details