Sun Fire V125 / V210 / V240 / V440
Sun Blade 1500 (Red & Silver)
Sun Blade 2500 (Red & Silver)
Sun Blade SX1500 / SX2500
Netra 240 / 440

Options 5502 / 5503 / 5504
Options 7702 / 7703 / 7704 / 7711
Options 7702A-4 / 7703A-4 / 7704A-4 / 7711A-4

370-7680 370-7670 370-7671 370-7672
DDR266/333, PC2100/2700
ECC, SPD 0.0 or 1.0
256MB Registered DIMM
512MB Option 7702
512MB FRU F540-6399
Only supported on:
V210/V240
SB1500 (Red)
Netra 240		 DDR266/333, PC2100/2700
ECC, SPD 0.0 or 1.0
512MB Registered DIMM
1GB Option 7703
2GB Option 5502
1GB FRU F540-6400
Not supported on:
V125		 DDR266/333, PC2100/2700
ECC, SPD 0.0 or 1.0
1GB Registered DIMM
2GB Option 7704
4GB Option 5503
2GB FRU F540-6401
See 1GB DIMM Note below
Not supported on:
V125 		DDR266/333, PC2100/2700
ECC, SPD 0.0 or 1.0
2GB Registered DIMM
4GB Option 7711
8GB Option 5504
4GB FRU F540-6402
Only supported on:
SB1500 (Silver)
SB2500 (Silver)
Netra 440
Sun Fire V440
See 370-7672
directly below
371-1115 371-1116 371-1117 370-7672
DDR266/333, PC2100/2700
ECC, SPD 0.0 or 1.0
256MB Registered DIMM
512MB Option 7702A-4
512MB FRU F540-6775
RoHS:YL
Only supported on:
V210/V240
Netra 240		 DDR266/333, PC2100/2700
ECC, SPD 0.0 or 1.0
512MB Registered DIMM
1GB Option 7703A-4
1GB FRU F540-6776
RoHS:YL
Only supported on:
V125/V210/V240/V440
Netra 240, 440		 DDR266/333, PC2100/2700
ECC, SPD 0.0 or 1.0
1GB Registered DIMM
2GB Option 7704A-4
2GB FRU F540-6777
RoHS:YL
Only supported on:
V125/V210/V240/V440
Netra 240, 440		 DDR266/333, PC2100/2700
ECC, SPD 0.0 or 1.0
2GB Registered DIMM
4GB Option 7711A-4
4GB FRU F540-6402
RoHS:YL
Only supported on:
V125
V210 (1.33GHz)
V240 (1.33/1.5GHz)
V440
See 370-7672
directly above

Notes

  1. Bank, Rank, DIMM, and XOR Interleaving is supported.
  2. Options include two DIMMs from the same vendor with the same SPD and speed.
  3. FRUs include two DIMMs from the same vendor with the same SPD and speed.
  4. Only CPU 0 DIMMs are accessible in a single CPU system (CPU 0).
  5. Memory is mapped globally and is accessible by any CPU in a multi-CPU system.
  6. Do Not mix DIMM speeds, manufacturers, or part numbers in the same bank.
  7. Mixed speed or mixed SPD DIMMs on the same board is supported in OBP.
  8. Mixed speed or mixed SPD DIMMs in the same bank is not supported in OBP.
  9. Mixed speed DIMMs in different banks serving the same CPU run at the lower speed.
  10. 2GB DIMMs are only supported on the faster processor speeds in V210 and V240:
    V210 (1.33Ghz)
    V240 (1.33/1.5Ghz)

Installation Notes

  1. The minimum requirement is two DIMMs.
  2. Install the first SB1500 DIMMs in DIMM0 and DIMM1 or DIMM2 and DIMM3.
  3. Install the first SB2500 DIMMs in CPU0 DIMM2 and DIMM3.
  4. Install the first V210 DIMMs in CPU0 B0/D0 and B0/D1 or B1/D0 and B1/D1.
  5. Install the first V240 DIMMs in CPU0 B0/D0 and B0/D1 or B1/D0 and B1/D1.
  6. Install the first V440 DIMMs in CPU0 B0/D0 and B0/D1 or B1/D0 and B1/D1.
  7. Install the first Netra 240 DIMMs in CPU0 B0/D0 and B0/D1.
  8. Install the first Netra 440 DIMMs in CPU0 B0/D0 and B0/D1 or B1/D0 and B1/D1.

OBP Requirements

   
System SPD 1.0 DDR266 DDR333 Mixed Pairs Mixed Banks
DDR266/333
SB1500 4.9v5 4.9v5 4.9v5 Not Supported 4.16v1**
SB2500 4.9v5 4.9v5 4.9v5 Not Supported 4.16v1**
V210/V240 4.11v4 4.11v4 4.11v4 Not Supported 4.16v1**
V440 4.10v10 4.10v10 4.13.v2 Not Supported 4.16v1**
Netra 240* 4.11v4 4.11v4 4.11v4 Not Supported 4.16v1**
Netra 440* 4.10v10 4.10v10 4.13v2 Not Supported 4.16v1**
* The first Netra 240 OBP was 4.11v4. The first Netra 440 OBP was 4.13v0.
** System Board FRUs without OBP 4.16v1 may require removal of mixed banks until OBP is updated.

1GB DIMM Note

  1. Sun Fire V210 systems with the following manufacturing part numbers require Fan Upgrade Kit X7418A when upgrading to 1GB DIMMs:
    602-2307-01
    602-2307-02
    602-2394-01
    602-2394-02
  2. The manufacturing part number can be found on a sticker on the right rear side of the system (as seen from the front).

UltraSPARC IIIi Notes

  1. The Memory Control Unit is integrated in the UltraSPARC IIIi.
  2. UltraSPARC IIIi supports 128MB to 1GB single bank DIMMs.
  3. UltraSPARC IIIi supports 256MB to 2GB dual bank DIMMs.
  4. Two DIMMs of the same bank size (single or dual) and memory size form a bank.
  5. Memory error reporting identifies a failing Bank, not a single failing DIMM.
  6. If a memory bank is mixed with single bank and dual bank DIMMs, the memory bank will fail POST. Always replace DIMMs as a pair in the same bank. Do not move single DIMMs between banks unless all DIMMs are identified as the same.

Sun Fire V125 Notes

  1. Factory configurations with 512MB DIMMs may include 370-7972 or 371-1116.
  2. DIMM 370-7972 is a manufacturing substitute for 370-1116 in V125 assembly 602-3652-01.
  3. Memory options 7703A-2 and X7703A-4 with 512MB DIMMs only include 371-1116.
Der Verkauf erfolgt unter Ausschluss jeglicher Gewährleistung und Sachmangelhaftung.Die Haftung auf Schaden­ersatz wegen Verletzungen von Gesundheit, Körper oder Leben und grob fahr­lässiger und/oder vorsätzlicher Verletzungen meiner Pflichten als Verkäufer bleibt davon unberührt.
Ich löse meine Sammlung auf - Keine Rücknahme

International bidders are welcome. Please ask for shipmet rate.