Audio equipment maintenance and circuits,electronic toys and remote control model car electronic circuits. |
School after-school teaching practice and stucent development of electronic small production. |
On-site repair common electronic equipment(air conditioning or industrial frequency power inverter,AC/DC switching power supply or inverter,elevator and building fire-fighting equipment,industrial control circuit). |
Hardware maintenance or software debugging RS232,RS485,I2C,CAN and other communications interface circuits,LED display and keyboard scan driver circuit,brushless motor drive circuit. |
Observing the slow signal changes needed for applications(such as:relay and switch contacts jitter,battery charge and discharge curves,power supply load transient response characteristics of the temperature sensor measurements). |
Supply the electronic circuit(SCR voltage regulator,power factor compensation,electronic energy-saving lamps,dysprosium lamp mercury lamp sodium lamp drive circuit xenon lights,etc). |
|
Analog Band width
|
0-2MHz
|
Maximum real-time sampling rate
|
2.5Msps
|
Vertical Sensitivity
|
5mV/Div-20V/Div 12 files(by way of progressive1-2-5)
|
Horizontal time base range
|
10us/Div-50s/Div 21 files(by way of progressive1-2-5)
|
Maximum input voltage
|
50Vpk(100Vpp)
|
Record Length
|
512/1024 optional
|
Input impedance
|
1Mohm
|
ADC Accuracy
|
8Bit
|
Coupling
|
DC/AC
|
Trigger mode
|
Auto(AUTO),conventional(NORM) and single(SING)
|
Trigger edge
|
up,down
|
Size
|
70*80*18mm
|
Weight
|
85kg(without probe)
|
|
Freeze at any time waveform display(HOLD function). |
Unique rolling slow signal display,the display can be fully continuous signal,unlike SCAN mode will cause the signal display discontinuous. |
Time cursors,can automatically calculate and display the time difference. |
Voltage cursors,can automatically calculate and display the voltage difference. |
Square wave test signal comes 1000Hz/3.3V. |
To save/recall waveform acquisition. |
PC upload waveform data. |
Battery/USB-powered. |
Built-in smart charger. |
|
Note: DSO112 generally not suitable for measuring high-frequency circuits, such as USB, RAM, a wireless transmitter, etc.
|
1 x DSO112 pocket oscilloscope. |
1 x USB Cable. |
2 x Probe. |
1 x Manual. |
|