Product Specification:
Rated voltage ： 12/24V
Rated current ： 100A
Max. PV voltage： 50V
Max. PV input power： 750W(12V) / 1500W(24V)
Matching of mode to battery type:b01, lithium ternary
b02, Lead-acid batteries, lithium iron phosphate batteries
b03, Water Battery, Gel Battery
Refer to the instruction manual for the method of adjusting the mode
|
|
|
|
|---|---|---|
|
USB charging life, support most USB port devices in the market. Thickening the heat dissipation backplane to improve the heat dissipation performance of MOS tube close to the heat dissipation design. |
Standard size PBC board, four screws fixed PBC board, electronic components stable performance, Dual mosfet Reverse current protection, low heat production. |
The connecting port with large section and large spacing can be installed with 6mm wire. The spacing of 9.5mm increases the insulation performance and the possibility of installation, effectively reduces the voltage drop of the circuit and reduces the loss. |
|
|
|
|
|---|---|---|
|
LCD screen Dual USB Easy to Install and Operate |
Complete 3 stage charge management, effectively protect the battery, battery more durable. |
Aluminum alloy heat dissipation base plate, speed up heat dissipation |
Product Features:
MPPT solar charge controller: Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.
Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection during charging, bidirectional focusing tracking.
Large-screen LCD display, adjustable charging and discharging parameters.
This MPPT controller has perfect SOC function, control charge current, and supply power to the loads.
Prevent the battery from over-charging, over-discharging and reverse charging to solar panels during nights.
Others:
1. Always keep the battery on fill voltage condition.
2. Prevent the battery from over-charging.
3. Prevent the battery from over-discharging.
4. Prevent the battery from reverse charging to solar panels during nights.
5. Reverse Polarity Protection for Battery
6. Reverse Polarity Protection for Solar Panels
7. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.
8. Thunder protection
9. According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25℃ condition, locked by the CPU procedure, cannot adjust.)
10. The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.
Package Includes:
1 x MPPT Solar Charge Controller
1 x User Manual
