eBay

SPECIFICATION

color: Black

Material: Aluminum Foil + Butyl Rubber + Wax Paper

Color: silver/black

Recommended Install Temperature: -10°C ~ +60°C

Resistance Temperature Range: -40°C ~ +149°C

Waterproof & Fire Resistant: Yes

Sheet Thickness Approx.: 2.2mm-2.5mm

Roll Thickness Approx.: 2.2mm-2.5mm

Size Approx. (L x W): 50cm x 400cm

DESCRIPTION

-Compared with Butyl Rubber materials on the market,we promise:The Butyl Rubber material we use is almost the highest purity,it doesn't give off any Formaldehyde、Acetaldehyde、Bitumen. About the Butyl Rubber, safety is the thing you should be most concerned about,of course, we specially took a long time and did SGS test , to make sure all buyers ( Suitable for pregnant women and babies ) can buy with confidence.

-The vibration damping products controls vibration and sound as well as heat via the combination of a butyl based noise absorption layer and an aluminum foil top layer. Use this to reduce panel vibration which will reduce road noise, improve sound quality from your audio system, and also keep the car cooler in summer and warmer in winter.

-It with the top-grade softness and is suitable for almost any solid surface. Not only is it easy to use and install, but it's an excellent solution for controlling noise and heat will do so for a great many years. This product can be used on every panel in your car to create the perfect quiet driving experience.

FEATURES

✔Environmental materials butyl rubber

✔Embossed pattern reduces creasing & works as a guide when cutting.

✔True aluminium face

✔With excellent vibration and noise reduction, sound damping 2.5mm thick

✔Shock Absorption, vibration resistance, release the structure transmission attenuation vibration energy

✔Waterproof, Fire-proof, Cold resistance, anti-aging and strong adhesion

✔High temperature resistance

✔ Keep your drive comfortable and cool in summer, and warm in winter

✔Seriously sticky stuff + Super easy to install Can be easily molded to the shape of car floor pans, inner doors and parcel shelves

APPLICATION

-Rear decks

-Doors

-Floors

-Any part of the trunk

-Trunk

-Roof

-Quarter panels

-Hoods

PACKAGE INCLUDE

4M Roll of Black Sound deadener + 1x Installation kit(free gift)

Installation

1.Decide what part of the car you want to insulate first:roof,floor,doors or a hood.

2.Remove the remains of the factory insulation once you have dismantled the interior.Properly clean and degrease the surface prior to installation of deadener.

3.Measure the pre-cleaned surface of the prospective spot that you are going to treat.

4.Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.When your sheet is ready to used,lay that down to the surface and let is glue.Flatten the sheet with hands to avoid air bubbles between the metal and insulation material.Use a roller for rolling down the foil as a neat step.

Installation Notices:

Please clean the surface you want to paste.

Make insulation materials and sheet metal firm fit,and play best adhesive,damping performance.

Paste soundproof or damping plate,you could heat with a hair dryer to make it soft,then compacted by hand.If the room temperature is below 5 degrees Celsius first with sun lamp heating it until soft.Then remove the wax paper and paste.

It would be best to wear the gloves when working.

On 19/01/2024 at 16:22:17 AEDT, seller added the following information:

On 28/02/2024 at 00:58:07 AEDT, seller added the following information:

On 09/04/2024 at 16:51:17 AEST, seller added the following information: