iLED:
Cure 2mm reins in one second
Light intensity up to 2500mw/cm2
Constant power output, born for restoration
360 degree rotatable head, extend the possibility
1 sec for curing, Go quicker than ever
ergonomics design, optimize the hand-grip use
Basic Data
Battery: 3.7V
Power input: AC100V-240V
Package：1PC
Color: White
---------------------------------------------
iLED Plus:
Features:
Wide spectrum, High light intensity, Focused light
Constant power output, born for teeth restoration
360° curing, reach every angle
Fluid design, better hand feeling
Upgraded light intensity
Two modes for option
With the maximum light intensity of 2500mw/cm2
Curing 2mm resin in 1 second
Which makes it especially suitable for orthodontic brackets, porcelain verneers and post-core adhensives.
Technical parameter:
1. Light output: 1000 mW/cm2 ~2500mW/cm2
2. Wave length: 385nm-515nm
3. 360° rotatable head
4. 1 sec for curing
5. Time setting:
Turbo (P1)-1s, 3s ,2300~2500 mw/cm²
Normal (P2)-5s, 10s, 15s, 20s,1000~1200mw/cm²
Dimensions: 25mm×25mm×240mm
Net weight: 278g
Power Input: 100V to 240V, 50Hz/60 Hz
Wave length: 385nm-515nm
Light intensity：1000mW/cm²-2300mW/cm²
TWO Modes：
TURBO Mode: screen shows P1, Press the time button to select of
time which could be 1 and 3 seconds.Its output light intensity is about
2300 mW/cm2-2500 mW/cm2.
NORMAL Mode: screen shows P2, Press the time button to select
of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about
1000 mW/cm2-1200 mW/cm2.
Cure 2mm reins in one second
Light intensity up to 2500mw/cm2
Constant power output, born for restoration
360 degree rotatable head, extend the possibility
1 sec for curing, Go quicker than ever
ergonomics design, optimize the hand-grip use
Basic Data
Battery: 3.7V
Power input: AC100V-240V
Package：1PC
Color: White
---------------------------------------------
iLED Plus:
Features:
Wide spectrum, High light intensity, Focused light
Constant power output, born for teeth restoration
360° curing, reach every angle
Fluid design, better hand feeling
Upgraded light intensity
Two modes for option
With the maximum light intensity of 2500mw/cm2
Curing 2mm resin in 1 second
Which makes it especially suitable for orthodontic brackets, porcelain verneers and post-core adhensives.
Technical parameter:
1. Light output: 1000 mW/cm2 ~2500mW/cm2
2. Wave length: 385nm-515nm
3. 360° rotatable head
4. 1 sec for curing
5. Time setting:
Turbo (P1)-1s, 3s ,2300~2500 mw/cm²
Normal (P2)-5s, 10s, 15s, 20s,1000~1200mw/cm²
Dimensions: 25mm×25mm×240mm
Net weight: 278g
Power Input: 100V to 240V, 50Hz/60 Hz
Wave length: 385nm-515nm
Light intensity：1000mW/cm²-2300mW/cm²
TWO Modes：
TURBO Mode: screen shows P1, Press the time button to select of
time which could be 1 and 3 seconds.Its output light intensity is about
2300 mW/cm2-2500 mW/cm2.
NORMAL Mode: screen shows P2, Press the time button to select
of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about
1000 mW/cm2-1200 mW/cm2.
----------------------------------------------------------------
FDA Statement：
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies.
If so, you can bid on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller's name: 2013eshop01
City: Shenzhen State: Gunagdong.China
Telephone number:0755-83162399
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies.
If so, you can bid on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller's name: 2013eshop01
City: Shenzhen State: Gunagdong.China
Telephone number:0755-83162399
