M. 2 2280 SSD Heat Sink Solid State Drive Radiator Fully Electroplated Reflow Welding AGHP Heat Pipe Radiator Double Copper Pipe with Thermal Silicone Pad SSD Cooler Gasket
Feature:
1. Metal Mirror Top Cover: The all-metal mirror surface casing of M. 2 2280 SSD heat sink not only enhances cooling but also provides a visually appealing hardware display for your computer.
2. Dual Heat Pipes: SSD radiator equipped with two 5mm AGHP gravity-defying copper heat pipes and utilizing single tube dual-adhesive reflow soldering technology, this product significantly improves heat pipe conductivity efficiency.
3. Passive Cooling: The full metal base with approximately 60,000 square millimeters of passive cooling fins ensures stability, durability, and efficient heat dissipation. Solid state drive radiator not only protects your M2 hard drive but also enhances cooling effectiveness.
4. Double-sided Thermal Pads: The AGHP heat pipe radiator features a 4.0W/m.k thermal silicon pad that tightly adheres to the aluminum alloy heat sink, enabling quick heat dissipation from the hard drive and ensuring data safety. (Note: The thermal silicon pad is pre-applied on the bottom of the heat sink. Please remove the protective film before installation.)
5. Efficient Heat Management: By combining the metal mirror top cover, dual heat pipes, passive cooling fins, and double-sided thermal pads, this SSD heatsink offers superior heat management. Enjoy enhanced performance and extended lifespan for your computer components.

 

Specification:
Origin: Mainland China
Model Number: M2 10
Type: M.2 SSD Cooler
Material: Copper,Aluminum
RGB Support: NO RGB
Product name: 2280 heat pipe SSD solid state drive radiator
Product brand: for Teucer
Product model: M.2-10
Back plate material: metal
Air cooling fins: full electroplating reflow soldering process
Heat dissipation method: heat pipe
Heat pipe: 2x5mm
Thermal conductive film: 4.0W/m.K thermal conductivity
Product size: 77x34x20mm/3.03x1.34x1.04inch
Product weight: 80g

Note: The silicone sheet has been installed inside the radiator and is not included separately in the delivery list. This product is only a radiator and does not include hard drives or SSDs.

installation steps:
first step:
Remove the 4 screws on both sides of the radiator and remove the base; tear off the blue protective plastic sticker of the silicone pad at the bottom; (Note: Be sure to tear off the blue protective film and transparent protective film of the silicone pad)
Step 2:
Paste the SSD on the thermal paste of the radiator, and then paste another thermal pad on the surface of the SSD; (Note: When the radiator is turned upside down, the SSD gold finger notch is on the right)
third step:
Reinstall the radiator base and tighten the screws on both sides;
the fourth step:
Install the solid-state drive to the M.2 socket on the motherboard;

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

1 X Radiator (Hard Drive Not Included)